Anyone know why this tape won’t load? Error is…
“3001 OK mount requested. Specified slot ignored. Device="Drive1" (/dev/nst0)“
Thanks,
JJ
3306 Issuing autochanger "list" command.
Slot | Volume Name | Status | Media Type | Pool |
------+------------------+-----------+----------------------+--------------------|
1 | 000010L4 | Used | LTO4 | Offsite |
2 | 000032L4 | Append | LTO4 | Scratch |
3 | 000031L4 | Append | LTO4 | Scratch |
4 | 000035L4 | Full | LTO4 | Onsite |
5 | 000034L4 | Full | LTO4 | Offsite |
6 | 000039L4 | Append | LTO4 | Onsite |
7 | 000036L4 | Append | LTO4 | Offsite |
8 | | | | |
9 | | | | |
10 | | | | |
11 | | | | |
12 | 000057L4 | Error | LTO4 | Offsite |
13 | 000058L4 | Error | LTO4 | Offsite |
14 | 000024L4 | Error | LTO4 | Offsite |
15 | 000059L4 | Full | LTO4 | Offsite |
16 | 000038L4 | Append | LTO4 | Scratch |
*load
load: is an invalid command.
You have messages.
*mount
The defined Storage resources are:
1: File
2: Tape
Select Storage resource (1-2): 2
Enter autochanger slot: 7
3001 OK mount requested. Specified slot ignored. Device="Drive1" (/dev/nst0)