If you look at the error below. I have a fresh labelled tape
L2-0030 which is status APPEND.
The drive in Tape0 is being written to, but if you look at Tape1
it is blocked waiting to create a volume, even though the volume is already in
the drive.
Can anyone help me or do I have to do a reset of the SD?
Thanks
Brian.
Version: 3.0.3a (06 December 2009) Linux Cross-compile Win32
Device status:
Autochanger "TL4000" with
devices:
"TL-0" (Tape0)
"TL-1" (Tape1)
Device "TL-0" (Tape0) is
mounted with:
Volume: L3-0041
Pool: ProductionDiff
Media type:
Ultrium3
Slot 40 is loaded in
drive 0.
Total
Bytes=160,804,740,096 Blocks=2,492,632 Bytes/block=64,512
Positioned at
File=160 Block=12,633
Device "TL-1" (Tape1) is
mounted with:
Volume: L2-0030
Pool: DirectorPeopleDiff
Media type:
Ultrium3
Device is BLOCKED waiting
to create a volume for:
Pool: DirectorPeopleDiff
Media type: Ultrium3
Slot 31 is loaded in
drive 1.
Total Bytes Read=0
Blocks Read=0 Bytes/block=0
Positioned at File=1
Block=0
Here is the volume status:
+---------+------------+-----------+---------+----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
| MediaId | VolumeName | VolStatus | Enabled |
VolBytes | VolFiles | VolRetention |
Recycle | Slot | InChanger | MediaType |
LastWritten |
+---------+------------+-----------+---------+----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
253 | L2-0030 | Append
| 1
| 64,512
| 0 | 3,888,000
| 1 | 31
| 1 | Ultrium3 |
0000-00-00 00:00:00