Hi,
I tried the mtx-changer script to load the volume,and bscan is working
away now.
Thanks for the help.
Dermot.
On 17 August 2010 22:30, Dermot Beirne <dermot.beirne AT dpd DOT ie> wrote:
> Hi John,
> Thanks for the very quick reply. I did actually try that, but i was
> expecting bscan to then request the autochanger to mount it itself.
>
> When i umounted it in bacula, bscan requested me to mount it manually.
> Did you just use your autoloader buttons to manually mount it from
> the slot to the drive, or do i need to use something else (mtx?) to
> mount it outside of bacula for bscan to see it?
>
> Thanks.
> Dermot.
>
>
>
> On 17 August 2010 17:52, John Drescher <drescherjm AT gmail DOT com> wrote:
>> On Tue, Aug 17, 2010 at 11:31 AM, Dermot Beirne <dermot.beirne AT dpd DOT
>> ie> wrote:
>>> Hi,
>>> I'm trying to repopulate catalogue with tapes that appear to have
>>> their records pruned.
>>>
>>> When using bscan, I'm getting the following output:
>>>
>>>
>>> bacula@ho-bksrv-11139:/usr/local/bacula/bin$ sudo ./bscan -V 000046L4
>>> -v -s -m -S -c /usr/local/bacula/bin/bacula-sd.conf /dev/nst0
>>> [sudo] password for bacula:
>>> bscan: butil.c:282 Using device: "/dev/nst0" for reading.
>>> 17-Aug 16:15 bscan JobId 0: Invalid slot=0 defined in catalog for
>>> Volume "000046L4" on "LTO-4" (/dev/nst0). Manual load may be required.
>>> 17-Aug 16:15 bscan JobId 0: 3301 Issuing autochanger "loaded? drive 0"
>>> command.
>>> 17-Aug 16:15 bscan JobId 0: 3302 Autochanger "loaded? drive 0", result
>>> is Slot 3.
>>> 17-Aug 16:20 bscan JobId 0: Warning: acquire.c:221 Read open device
>>> "LTO-4" (/dev/nst0) Volume "000046L4" failed: ERR=dev.c:474 Unable to
>>> open device "LTO-4" (/dev/nst0): ERR=Device or resource busy
>>>
>>> 17-Aug 16:20 bscan JobId 0: Invalid slot=0 defined in catalog for
>>> Volume "000046L4" on "LTO-4" (/dev/nst0). Manual load may be required.
>>> Mount Volume "000046L4" on device "LTO-4" (/dev/nst0) and press return
>>> when ready:
>>>
>>>
>>> The volume is loaded in the drive, as shown here:
>>>
>>> Device status:
>>> Autochanger "Dell-PV124T" with devices:
>>> "LTO-4" (/dev/nst0)
>>> Device "FileStorage" (/disk-backup) is not open.
>>> Device "Daily" (/disk-backup/Daily) is not open.
>>> Device "Weekly" (/disk-backup/Weekly) is not open.
>>> Device "Monthly" (/disk-backup/Monthly) is not open.
>>> Device "Yearly" (/disk-backup/Yearly) is not open.
>>> Device "LTO-4" (/dev/nst0) is mounted with:
>>> Volume: 000046L4
>>> Pool: Daily-Tape-Pool
>>> Media type: LTO-4
>>> Slot 3 is loaded in drive 0.
>>> Total Bytes Read=129,024 Blocks Read=2 Bytes/block=64,512
>>> Positioned at File=0 Block=0
>>> ====
>>>
>>> Used Volume status:
>>> 000046L4 on device "LTO-4" (/dev/nst0)
>>> Reader=0 writers=0 devres=0 volinuse=0
>>> ====
>>>
>>>
>>> Does anyone know how to get around the error?
>>>
>>
>> You need to unmount it in bacula to use bscan.
>>
>> John
>>
>>
>
------------------------------------------------------------------------------
This SF.net email is sponsored by
Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
