On 08/11/2010 04:36 PM, Pierre Bernhardt wrote:
> Hello,
> 
> is it possible to connect bscan to a postgresql database? I try to scan my 
> tapes
> but bscan could not find the bacuala.db which says to me, that bscan do not 
> try
> to connect to the postgresql db I given in the command line:
> 
> root@backup:/etc/bacula# bscan -vv -d 99 -c bacula-sd.conf -n bacula -u 
> bacula -P Mrdu9E4rlMO4lQ -h localhost:5433 -s -m -V 
> DLT-IV-034\|DLT-IV-035\|DLT-IV-036\|DLT-IV-037\|DLT-IV-038\|DLT-IV-039\|DLT-IV-040
>  /dev/nst2m
> bscan: stored_conf.c:675-0 Inserting director res: backup-mon
> bscan: stored_conf.c:675-0 Inserting device res: SDLT-1
> bscan: stored_conf.c:675-0 Inserting device res: DEC TZ89
> bscan: stored_conf.c:675-0 Inserting device res: QUANTUM DLT8000
> bscan: butil.c:282 Using device: "/dev/nst2m" for reading.
> bscan: acquire.c:107-0 MediaType dcr= dev=DLT IV
> 11-Aug 16:28 bscan JobId 0: Invalid slot=0 defined in catalog for Volume 
> "DLT-IV-034" on "QUANTUM DLT8000" (/dev/nst2m). Manual load my be required.
> 11-Aug 16:28 bscan JobId 0: 3301 Issuing autochanger "loaded? drive 1" 
> command.
> 11-Aug 16:28 bscan JobId 0: 3302 Autochanger "loaded? drive 1", result is 
> Slot 7.
> bscan: acquire.c:209-0 opened dev "QUANTUM DLT8000" (/dev/nst2m) OK
> bscan: acquire.c:212-0 calling read-vol-label
> bscan: reserve.c:313-0 jid=0 reserve_volume DLT-IV-034
> bscan: reserve.c:238-0 jid=0 new Vol=DLT-IV-034 at 80da140 dev="QUANTUM 
> DLT8000" (/dev/nst2m)
> bscan: reserve.c:181-0 jid=0 List from end new volume: DLT-IV-034 at 80da140 
> on device "QUANTUM DLT8000" (/dev/nst2m)
> 
> Volume Label:
> Id                : Bacula 1.0 immortal
> VerNo             : 11
> VolName           : DLT-IV-034
> PrevVolName       :
> VolFile           : 0
> LabelType         : VOL_LABEL
> LabelSize         : 162
> PoolName          : Scratch
> MediaType         : DLT IV
> PoolType          : Backup
> HostName          : backup
> Date label written: 25-Mai-2010 23:58
> 11-Aug 16:28 bscan JobId 0: Ready to read from volume "DLT-IV-034" on device 
> "QUANTUM DLT8000" (/dev/nst2m).
> 11-Aug 16:28 bscan: ERROR TERMINATION at bscan.c:284
> sqlite.c:177 Database /var/lib/bacula/bacula.db does not exist, please create 
> it.
> 
> I modified the -h -P -u and -n differently but nothing helps. Any idea?
> I know the release is allready deprecated, but at the moment it works and I 
> need some time
> to spend for an upgrade which I not have at the moment.
> 
> Cheers..
> Pierre

Pierre you need to use a bscan utility compiled for postgresql, the one you 
used is for sqlite ...
> sqlite.c:177 Database /var/lib/bacula/bacula.db does not exist, please create 
> it.

That's why it was bugging :-)


-- 

Bruno Friedmann  bruno AT ioda-net DOT ch

Ioda-Net Sàrl www.ioda-net.ch

  openSUSE Member
    User www.ioda.net/r/osu
    Blog www.ioda.net/r/blog

  fsfe fellowship www.fsfe.org
  (bruno.friedmann (at) fsfe.org )

  tigerfoot on irc

GPG KEY : D5C9B751C4653227

------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev 
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users