2010/8/11 Romer Ventura <rventura AT h-st DOT com>:
> Hello,
> I am running a full back up with a size of  "estimate files=983,529
> bytes=306,761,539,624", the backup started normally and used up 1 full tape
> 160GB (uncompressed), then it switched tapes and continued to copy data to
> the second tape, but all of the sudden it stops and bacula starts
> complaining with: "JobId 2: Warning: Unable add Scratch Volume, Pool
> "Full-Pool-dsk-tpe" full MaxVols=2"
> list media shows:
> +---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
> | MediaId | VolumeName | VolStatus | Enabled | VolBytes        | VolFiles |
> VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten
> |
> +---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
> |       1 | CNH910     | Full      |       1 | 164,989,504,512 |      166 |
>    2,592,000 |       1 |    1 |         1 | tape      | 2010-08-10 20:53:33
> |
> |       2 | CNH911     | Used      |       1 | 142,552,940,544 |      143 |
>    2,592,000 |       1 |    2 |         1 | tape      | 2010-08-11 00:53:24
> |
> +---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
> Both tapes are the same, both of them are capable of storing 160GB of
> uncompressed data. Why is it still asking for more tapes?
> Also, status on director shows:
> Running Jobs:
> Console connected at 10-Aug-10 16:13
>  JobId Level   Name                       Status
> ======================================================================
>      2 Full    H34-FileServ-dsk-tap.2010-08-10_22.00.00_08 is waiting for an
> appendable Volume
>      3 Full    H34-FileServ-dsk-dsk.2010-08-10_22.00.00_09 is waiting on max
> Client jobs
>      4 Full    BackupCatalog.2010-08-10_23.10.00_10 is waiting for higher
> priority jobs to finish
> ====
> Terminated Jobs:
>  JobId  Level    Files      Bytes   Status   Finished        Name
> ====================================================================
>      1  Full    983,490    307.0 G  OK       11-Aug-10 00:55
> H34-FileServ-dsk-tap
> Why is the backup still running even when it is shown in "Terminated Jobs"
> with OK status..?
> Thanks

That is a different job. Job 1 finished and wrote 307GB. For some
reason you are running the H34-FileServ-dsk-tap job 2 times.

John

------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev 
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users