2010/6/12 Daniel Bareiro <daniel-listas AT gmx DOT net>:
> On Friday, 11 June 2010 22:36:47 -0300,
> Daniel Bareiro wrote:
>
>> However, in the operating system I'm only seeing the tape drive, but
>> not the autochanger:
>>
>>
>> backup:~# cat /proc/scsi/scsi
>> Attached devices:
>> Host: scsi3 Channel: 00 Id: 00 Lun: 00
>>   Vendor: ATA      Model: ST3160211AS      Rev: 3.AA
>>   Type:   Direct-Access                    ANSI  SCSI revision: 05
>>
>>
>> But I'm not seeing a /dev/st0 or /dev/nst0 device.
>
> Now that I see, this has nothing to do with the tape drive:
>

My guess is you do not have the sas driver loaded.

John

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users