Hi,
I am testing 5.0.1 on a new server with a SAS LTO-3 drive, and Ubuntu
Lucid. Btape says the test succeeded and then says it failed. Did it fail?
Wrote block=1640000, file,blk=99,14449 VolBytes=424,668,823,552
rate=49.10 MB/s
22-Apr 16:51 btape JobId 0: End of Volume "TestVolume1" at 100:2157 on
device "Tape" (/dev/nst0). Write of 262144 bytes got -1.
22-Apr 16:51 btape JobId 0: Re-read of last block succeeded.
btape: btape.c:2701 Last block at: 100:2156 this_dev_block_num=2157
btape: btape.c:2736 End of tape 100:0. Volume Bytes=425,741,254,656.
Write rate = 49.05 MB/s
btape: btape.c:2311 Wrote 1000 blocks on second tape. Done.
Done writing 0 records ...
btape: btape.c:2380 Wrote state file last_block_num1=2156 last_block_num2=0
btape: btape.c:2395
16:51:11 Done filling tape at 100:0. Now beginning re-read of tape ...
btape: btape.c:2476 Enter do_unfill
22-Apr 16:51 btape JobId 0: Ready to read from volume "TestVolume1" on
device "Tape" (/dev/nst0).
Rewinding.
Reading the first 10000 records from 0:0.
10000 records read now at 1:1251
Reposition from 1:1251 to 100:2156
Reading block 2156.
The last block on the tape matches. Test succeeded.
btape: btape.c:2403 do_unfill failed.
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|