2009/12/9 Shawn <shawn AT artemide DOT us>
>
> Hello again, folk,
>
>     Checked out there and there's really only a few negligible results on 
> this problem.
>
>     Following a full upgrade, from 2.4.4 to 3.0.2 (all packages), the 
> bconsole program just won't let me connect.
>
>     I've checked both .conf files, passwords/addresses/etc, tried changing 
> address on both to name, IP, etc. but it won't let me connect.
>
> Output of:
>
>     bconsole -c /etc/bacula/bconsole.conf -d 100 -dt
>
> Connecting to Director 10.6.4.238:9101
> 09-Dec-2009 11:46:56 bconsole: bsock.c:221-0 Current host[ipv4:(ip address 
> hidden):9101] All host[ipv4:(ip address hidden):9101]
> 09-Dec-2009 11:46:56 bconsole: bsock.c:155-0 who=Director daemon host=(ip 
> address hidden) port=9101
>     (Gets hung here for about 300 seconds or so)
> Director authorization problem.
> Most likely the passwords do not agree.
> If you are using TLS, there may have been a certificate validation error 
> during the TLS handshake.
> Please see 
> http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION003760000000000000000
>  for help.
>
>
>     All I see that's noticeable, while debugging bacula-dir, is that the 
> client tries to connect, and that's about it:
>
> 09-Dec-2009 11:46:56 (dir host hidden): bnet.c:670-0 who=client host=(ip 
> address hidden) port=36131
>
>     I'm actually not using TLS or anything, has anyone encountered this 
> oddity before?
>
> Thanks in advance,
>

Did you verify that the director is actually started?


--
John M. Drescher

------------------------------------------------------------------------------
Return on Information:
Google Enterprise Search pays you back
Get the facts.
http://p.sf.net/sfu/google-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users