Hi,
28.05.2009 16:48, Brian Claveau wrote:
> Good Afternoon,
>
>
> I am having a problem with Bacula utilizing all the drives in my
> Quantum Scalar 50 Tape Library. I added a print to /var/log/messages
> to see what was being passed to the mtx-changer script and it only has
> references to the 1st drive, never seems to look or ask about either of
> the other two drives.
>
> Far as I can tell I have set it up with the correct values in the
> correct places. I am running Bacula 3.0. On a FreeBSD 7.0 platform.
> After running with it just using the 1st drive I tried labeling 2 new
> tapes in the library and when asked what drive to use I listed the 2nd
> drive which it used without issue or error, so Bacula is able to see and
> use the the other drives. Why will it not automatically use the other
> drives. Do I need to specify which drive to use, or can Bacula decide
> to use a free drive on its own. Which is how I expected it to work.
First, always be aware that any job in Bacula will only use exactly
one device.
So you need to enable concurrent jobs first.
You also need to make sure the jobs running in parallel either use
different pools, or use "Prefer Mounted Volume = No" in the
configuration. The latter is deprecated.
Only then can you expect to see more than one drive being used.
Arno
> Any an all assistance is greatly appreciated.
>
> Bacula-Dir.conf(Excerpt):
> JobDefs {
> Name = "Bourne"
> Type = Backup
> Level = Incremental
> Client = bourne-fd
> FileSet = "Full Set - Bourne"
> Schedule = "BH_WeeklyDailyCycle"
> Full Backup Pool = Full
> Incremental Backup Pool = Incr
> Differential Backup Pool = Diff
> Storage = LTO4
> Messages = Standard
> Pool = Default
> Priority = 6
> Max Start Delay = 168h
> Max Run Time = 240h
> }
>
> Storage {
> Name = LTO4
> # Do not use "localhost" here
> Address = untouchables # N.B. Use a fully qualified
> name here
> SDPort = 9103
> Password = "VeriVue00Bacula00"
> #Device = Drive-1
> #Device = Drive-2
> #Device = Drive-3
> Device = "Autochanger"
> Media Type = LTO4
> Autochanger = yes
> }
>
>
>
> Bacula-sd.conf(Excerpt):
> #
> # An autochanger device with two drives
> #
> Autochanger {
> Name = Autochanger
> Device = Drive-1
> Device = Drive-2
> Device = Drive-3
> # Changer Device = /dev/sg0
> Changer Device = /dev/pass1
> Changer Command = "/usr/local/share/bacula/mtx-changer %c %o %S %a %d"
> }
>
> Device {
> Name = Drive-1 #
> Drive Index = 0
> Media Type = LTO4
> Archive Device = /dev/nsa0
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes;
> Autoselect = yes
> # #
> # # Enable the Alert command only if you have the mtx package loaded
> # # Note, apparently on some systems, tapeinfo resets the SCSI controller
> # # thus if you turn this on, make sure it does not reset your SCSI
> # # controller. I have never had any problems, and smartctl does
> # # not seem to cause such problems.
> # #
> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> # If you have smartctl, enable this, it has more info than tapeinfo
> # Alert Command = "sh -c 'smartctl -H -l error %c'"
> }
>
> Device {
> Name = Drive-2 #
> Drive Index = 1
> Media Type = LTO4
> Archive Device = /dev/nsa1
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes;
> Autoselect = yes
> # # Enable the Alert command only if you have the mtx package loaded
> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> # If you have smartctl, enable this, it has more info than tapeinfo
> # Alert Command = "sh -c 'smartctl -H -l error %c'"
> }
>
>
>
> Device {
> Name = Drive-3 #
> Drive Index = 2
> Media Type = LTO4
> Archive Device = /dev/nsa2
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes;
> Autoselect = yes
> # # Enable the Alert command only if you have the mtx package loaded
> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> # If you have smartctl, enable this, it has more info than tapeinfo
> # Alert Command = "sh -c 'smartctl -H -l error %c'"
> }
>
>
>
>
> --
> Warm Regards,
> Brian R. Claveau
>
> -==-==-==-==-==-===-==-==-==-==-==-==-==-==-==-==-==-
> Brian R. Claveau
> Email: brc AT beehivesecurity DOT com
> Beehive Security Management, LLC.
> -==-==-==-==-==-===-==-==-==-==-==-==-==-==-==-==-==-
>
>
> ------------------------------------------------------------------------
>
> ------------------------------------------------------------------------------
> Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT
> is a gathering of tech-side developers & brand creativity professionals. Meet
> the minds behind Google Creative Lab, Visual Complexity, Processing, &
> iPhoneDevCamp as they present alongside digital heavyweights like Barbarian
> Group, R/GA, & Big Spaceship. http://p.sf.net/sfu/creativitycat-com
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
------------------------------------------------------------------------------
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT
is a gathering of tech-side developers & brand creativity professionals. Meet
the minds behind Google Creative Lab, Visual Complexity, Processing, &
iPhoneDevCamp as they present alongside digital heavyweights like Barbarian
Group, R/GA, & Big Spaceship. http://p.sf.net/sfu/creativitycat-com
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
