Did you erase the tapes before re-running the backups?

I would recommend first to completely erase the tape(s), run "btape"
to make sure everything is working fine and then start testing the
actual backups. Capture the output while running "btape" and go
through it line by line to make sure you don't have even a single
error.

BTW, I forgot to mention I'm running Bacula version 2.2.6 on RHEL4 and
2.4.3 on RHEL5.2.

HTH,
Win

> Message: 7
> Date: Mon, 04 May 2009 13:13:45 +0200
> From: yvan <yvan AT skywalker.is-a-chef DOT com>
> Subject: Re: [Bacula-users] Tape MTEOM error with Dell TL2000 (IBM
>        TS3100)
> To: bacula-users AT lists.sourceforge DOT net
> Message-ID: <49FECDE9.8050204 AT skywalker.is-a-chef DOT com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi,
>
> thank you for the advices. We have very similar configurations, and I'm
> sure I'm not too far from the solution. I tried to use your settings in
> the storage daemon config file, and the "mt" options as well, than I
> didn't try so far.
>
> But, as soon as I put those settings, I have another error
>
>        Hardware End of Medium = No     # defaut is Yes
>        Fast Forward Space File = No    # This line required if above
>
> which is :
> 3-May 02:20 setmseblx0007-sd JobId 170: Error: Unable to position to end
> of data on device "IBMLTO4" (/dev/nst0): ERR=dev.c:1354 ioctl MTFSF
> error on "IBMLTO4" (/dev/nst0). ERR=Input/output error.
>
> Strange that it works for you then ... I issued all the "mt" commands
> you wrote. Tapeinfo gives me the samed infos as you have, but it's MTFSF
> error or MTEOM ...
>
> Regards
> Yvan Broccard

------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image 
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users