Good Morning Everyone,
I have an issue with Bacula. Here is the case. I Bacula setup on both
an Ubuntu Server machine and Solaris. The director is on Ubuntu and storage
server on Solaris. We have a LTO-180 Solaris tape library implemented. I
recently ran a label barcodes command which created volumes with the same
name as the barcodes: FCOM. This resulted in a default pool of volumes
FCOM01,.....FCOM20. I performed an update scan slots twice. I then moved
FCOM01-FCOM03 into a new pool i created: WindowsBackupServer Pool from the
default. Here are the tables:
Default Pool:
+---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+
| MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles |
VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten
|
+---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+
| 12 | FCOM04 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 104 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 13 | FCOM05 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 105 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 14 | FCOM06 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 106 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 15 | FCOM07 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 107 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 16 | FCOM08 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 108 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 17 | FCOM09 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 109 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 18 | FCOM10 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 110 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 19 | FCOM12 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 112 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 20 | FCOM13 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 113 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 21 | FCOM14 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 114 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 22 | FCOM15 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 115 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 23 | FCOM16 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 116 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 24 | FCOM17 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 117 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 25 | FCOM18 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 118 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 26 | FCOM19 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 119 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 27 | FCOM20 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 120 | 1 | LTO-2 | 0000-00-00 00:00:00 |
+---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+
Pool: Scratch
No results to list.
Pool: WindowsFileServerBackup
+---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+
| MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles |
VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten
|
+---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+
| 10 | FCOM02 | Append | 1 | 129,024 | 1 |
31,536,000 | 1 | 102 | 1 | LTO-2 | 2009-02-11 14:13:08 |
| 11 | FCOM03 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 103 | 1 | LTO-2 | 0000-00-00 00:00:00 |
| 28 | FCOM01 | Append | 1 | 64,512 | 0 |
31,536,000 | 1 | 101 | 1 | LTO-2 | 0000-00-00 00:00:00 |
+---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+
So thinking that my new pool has already volumes created and ready to go, i
executed a run statement at the bconsole. No tape were in the tape device,
thus no mounts. After executing run, i stated yes to start the job. I then
received a strange message when i did status all:
Device status:
Autochanger "Autochanger" with devices:
"Drive-1" (/dev/rmt/4cbn)
"Drive-2" (/dev/rmt/3cbn)
Device "Drive-1" (/dev/rmt/4cbn) is not open.
Device is BLOCKED waiting to mount a volume FCOM12
Pool: WindowsFileServerBackup
Media type: LTO-2
Drive 0 status unknown.
I then loaded and unloaded the tape device from my Solaris machine and then
ran an update slots scan on Ubuntu from the bconsole.
Now the error is
Device status:
Autochanger "Autochanger" with devices:
"Drive-1" (/dev/rmt/4cbn)
"Drive-2" (/dev/rmt/3cbn)
Device "Drive-1" (/dev/rmt/4cbn) is not open.
Device is BLOCKED waiting to create a volume for:
Pool: WindowsFileServerBackup
Media type: LTO-2
Drive 0 status unknown.
Can someone please help? I already have volumes in the in the new pool which
i transfered with the update volumes command. Bacula should see those
volumes and not be asking to label a new volume. Bacula is a nice program,
but i am starting to think due to its open source nature, it may be better
to simply spend money on NetBackup.
Thanks
Steve
--
View this message in context:
http://www.nabble.com/Bacula-BLOCK-issue-where-already-created-volumes-not-being-read-tp21976504p21976504.html
Sent from the Bacula - Users mailing list archive at Nabble.com.
------------------------------------------------------------------------------
Create and Deploy Rich Internet Apps outside the browser with Adobe(R)AIR(TM)
software. With Adobe AIR, Ajax developers can use existing skills and code to
build responsive, highly engaging applications that combine the power of local
resources and data with the reach of the web. Download the Adobe AIR SDK and
Ajax docs to start building applications today-http://p.sf.net/sfu/adobe-com
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
