2008/12/17 Jari Fredriksson <jarif AT iki DOT fi>:
>> 2008/12/17 Marc Schiffbauer <marc AT schiffbauer DOT net>:
>>> * Sergio Belkin schrieb am 17.12.08 um 13:53 Uhr:
>>>> How Can I define a remote storage in bacula-sd.conf ?
>>>> namely a tape device that is in another host that
>>>> bacula director.
>>>
>>> I think you ned to run the bacula-sd on that remote
>>> host, not on the host that runs bacula-dir.
>>>
>>> -Marc
>>
>>
>> I did so, but when start storage daemon, mt says:
>>
>>
>> bacula /dev/nst0: Device or resource busy
>>
>> and I can't label it from director
>>
>> --
>
> mt from shell says so, because the device is taken by bacula-sd. That is how 
> it is supposed to be.
>
> If you can't label it, that totally different. I don't know why that is.
>
>


I've found that I can't ever label tape. But there is more, I can't
tar to tape, it outputs I/O error.


lsscsi output is:


[0:0:0:0]    disk    ServeRA  raid 1           V1.0  /dev/sda
[0:1:0:0]    disk    IBM-ESXS VPA146C3-ETS10 N A650  -
[0:1:1:0]    disk    IBM-ESXS ST3146855SS      BA26  -
[0:3:0:0]    enclosu IBM-ESXS VSC7160          1.06  -
[0:3:1:0]    tape    IBM      HH LTO Gen 3     76B0  /dev/st0


Now, I doing :

mt -f /dev/nst0 erase

But I issue this command at 8:07 AM GMT, and now is 9:44 AM GMT, is it
common that it takes too much time?

Thanks in advance

-- 
--
Open Kairos http://www.openkairos.com
Watch More TV http://sebelk.blogspot.com
Sergio Belkin -

------------------------------------------------------------------------------
SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada.
The future of the web can't happen without you.  Join us at MIX09 to help
pave the way to the Next Web now. Learn more and register at
http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users