2.4.2-1 (Scott Barninger's RPM, but that shouldn't make any difference)

Using an autochanger.

Restores which only use a single tape are fine.

For multiple tape restores, even thought he tapes are in various slots,
Bacula is insisting on loading all the tapes it wants from the first slot
it uses.

IE: tape A,B,C,D are in slot 1,2,3,4

Bacula loads Tape C from slot 3.

Bacula then wants Tape A, but tries to load it from slot 3 and complains.

If Tape A is manually loaded, Bacula unloads it, loads slot 3 and then
complains.

If Tape A is put in Slot 3 bacula loads it happily.

Repeat for Tapes B and D.

Can anyone else verify?


AB


-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users