Hello,
This bug have been fixed last week. The 2.4.2 will be available soon. (this
weekend i think)
Bye
John Drescher-2 wrote:
>
> I had two jobs fail today when the tape drive was loading or unloading
> tapes.
>
> The first happened when the tape (DLT-IV) became full during a backup
> and so the tape was being unloaded and during the unload bacula
> determined it could not open the tape drive so it aborted the job.
>
> 24-Jun 09:48 fileserver-dir JobId 10771: Start Backup JobId 10771,
> Job=CleanImages.2008-06-24_09.48.52
> 24-Jun 09:48 fileserver-dir JobId 10771: Using Device "DLT-IV"
> 24-Jun 09:48 fileserver-sd JobId 10771: Volume "CleanImages-0222"
> previously written, moving to end of data.
> 24-Jun 09:49 fileserver-sd JobId 10771: Ready to append to end of
> Volume "CleanImages-0222" at file=61.
> 24-Jun 10:00 fileserver-sd JobId 10771: End of Volume
> "CleanImages-0222" at 63:1859 on device "DLT-IV" (/dev/nst0). Write of
> 262144 bytes got -1.
> 24-Jun 10:00 fileserver-sd JobId 10771: Re-read of last block succeeded.
> 24-Jun 10:00 fileserver-sd JobId 10771: End of medium on Volume
> "CleanImages-0222" Bytes=58,606,485,504 Blocks=223,565 at 24-Jun-2008
> 10:00.
> 24-Jun 10:00 fileserver-sd JobId 10771: Error: Could not open device
> "DLT-IV" (/dev/nst0): ERR=dev.c:432 Unable to open device "DLT-IV"
> (/dev/nst0): ERR=Input/output error
>
> 24-Jun 10:00 fileserver-fd JobId 10771: Fatal error: backup.c:892
> Network send error to SD. ERR=Broken pipe
> 24-Jun 10:00 fileserver-sd JobId 10771: Job write elapsed time =
> 00:11:14, Transfer rate = 3.688 M bytes/second
> 24-Jun 10:01 fileserver-dir JobId 10771: Error: Bacula fileserver-dir
> 2.4.0 (04Jun08): 24-Jun-2008 10:01:05
> Build OS: x86_64-pc-linux-gnu gentoo
> JobId: 10771
> Job: CleanImages.2008-06-24_09.48.52
> Backup Level: Full
> Client: "fileserver-fd" 2.4.0 (04Jun08)
> x86_64-pc-linux-gnu,gentoo,
> FileSet: "CleanPendingImages" 2006-03-01 14:38:22
> Pool: "CleanImages" (From Job resource)
> Storage: "DLT-IV" (From Job resource)
> Scheduled time: 24-Jun-2008 09:48:16
> Start time: 24-Jun-2008 09:48:25
> End time: 24-Jun-2008 10:01:05
> Elapsed time: 12 mins 40 secs
> Priority: 10
> FD Files Written: 4,739
> SD Files Written: 4,736
> FD Bytes Written: 2,486,868,804 (2.486 GB)
> SD Bytes Written: 2,486,247,410 (2.486 GB)
> Rate: 3272.2 KB/s
> Software Compression: None
> VSS: no
> Storage Encryption: no
> Volume name(s): CleanImages-0222
> Volume Session Id: 53
> Volume Session Time: 1213294542
> Last Volume Bytes: 0 (0 B)
> Non-fatal FD errors: 0
> SD Errors: 0
> FD termination status: Error
> SD termination status: Error
> Termination: *** Backup Error ***
>
> The same happens when starting a backup while the tape is loading:
>
> 24-Jun 11:52 fileserver-dir JobId 10772: Start Backup JobId 10772,
> Job=CleanImages.2008-06-24_11.52.57
> 24-Jun 11:52 fileserver-dir JobId 10772: Using Device "DLT-IV"
> 24-Jun 11:52 fileserver-sd JobId 10772: Error: Could not open device
> "DLT-IV" (/dev/nst0): ERR=dev.c:432 Unable to open device "DLT-IV"
> (/dev/nst0): ERR=Input/output error
>
> 24-Jun 11:52 fileserver-sd JobId 10772: Fatal error: Could not ready
> device "DLT-IV" (/dev/nst0) for append.
> 24-Jun 11:52 fileserver-fd JobId 10772: Fatal error: job.c:1817 Bad
> response to Append Data command. Wanted 3000 OK data
> , got 3903 Error append data
>
> 24-Jun 11:52 fileserver-dir JobId 10772: Error: Bacula fileserver-dir
> 2.4.0 (04Jun08): 24-Jun-2008 11:52:43
> Build OS: x86_64-pc-linux-gnu gentoo
> JobId: 10772
> Job: CleanImages.2008-06-24_11.52.57
> Backup Level: Full
> Client: "fileserver-fd" 2.4.0 (04Jun08)
> x86_64-pc-linux-gnu,gentoo,
> FileSet: "CleanPendingImages" 2006-03-01 14:38:22
> Pool: "CleanImages" (From Job resource)
> Storage: "DLT-IV" (From Job resource)
> Scheduled time: 24-Jun-2008 11:52:41
> Start time: 24-Jun-2008 11:52:43
> End time: 24-Jun-2008 11:52:43
> Elapsed time: 0 secs
> Priority: 10
> FD Files Written: 0
> SD Files Written: 0
> FD Bytes Written: 0 (0 B)
> SD Bytes Written: 0 (0 B)
> Rate: 0.0 KB/s
> Software Compression: None
> VSS: no
> Storage Encryption: no
> Volume name(s):
> Volume Session Id: 54
> Volume Session Time: 1213294542
> Last Volume Bytes: 0 (0 B)
> Non-fatal FD errors: 0
> SD Errors: 0
> FD termination status: Error
> SD termination status: Error
> Termination: *** Backup Error ***
>
>
> John
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
--
View this message in context:
http://www.nabble.com/Jobs-abort-as-failed-when-tape-is-loading-unloading-in-bacula-2.4.0-tp18096197p18097399.html
Sent from the Bacula - Users mailing list archive at Nabble.com.
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|