Re: [Bacula-users] Please mount Volume "A0000003" or label a new one for...
2008-06-20 02:28:56
Mmmm. The problem came again, but now with another tape. Here I dump the messages shown by bacula:
19-jun 22:00 servfich-dir JobId 53: Start Backup JobId 53, Job=Backup_de_Trabajo_Diario.2008-06-19_22.00.39 19-jun 22:00 servfich-dir JobId 53: There are no more Jobs associated with Volume "A0000004". Marking it purged. 19-jun 22:00 servfich-dir JobId 53: All records pruned from Volume "A0000004"; marking it "Purged" 19-jun 22:00 servfich-dir JobId 53: Recycled volume "A0000004" 19-jun 22:00 servfich-sd JobId 53: 3307 Issuing autochanger "unload slot 3, drive 0" command. 19-jun 22:05 servfich-sd JobId 53: 3995 Bad autochanger "unload slot 3, drive 0": ERR=Child died from signal 15: Termination Results=Unloading drive 0 into Storage Element 3...done Program killed by Bacula watchdog (timeout) 19-jun 22:05 servfich-dir JobId 53: Using
Device "Driver1" 19-jun 22:05 servfich-sd JobId 53: 3301 Issuing autochanger "loaded? drive 0" command. 19-jun 22:05 servfich-sd JobId 53: 3302 Autochanger "loaded? drive 0", result is Slot 3. 19-jun 22:05 servfich-sd JobId 53: 3307 Issuing autochanger "unload slot 3, drive 0" command. 19-jun 22:06 servfich-sd JobId 53: 3995 Bad autochanger "unload slot 3, drive 0": ERR=Child exited with code 1 Results=Unloading drive 0 into Storage Element 3...Destination Element Address 3 is Already Full 19-jun 22:06 servfich-sd JobId 53: 3301 Issuing autochanger "loaded? drive 0" command. 19-jun 22:06 servfich-sd JobId 53: 3302 Autochanger "loaded? drive 0", result: nothing loaded. 19-jun 22:06 servfich-sd JobId 53: 3301 Issuing autochanger "loaded? drive 0" command. 19-jun 22:06 servfich-sd JobId 53: 3302 Autochanger "loaded? drive 0", result: nothing loaded. 19-jun 22:06 servfich-sd JobId 53: 3301 Issuing autochanger "loaded? drive 0"
command. 19-jun 22:06 servfich-sd JobId 53: 3302 Autochanger "loaded? drive 0", result: nothing loaded. 19-jun 22:06 servfich-sd JobId 53: 3304 Issuing autochanger "load slot 4, drive 0" command. 19-jun 22:08 servfich-sd JobId 53: 3305 Autochanger "load slot 4, drive 0", status is OK. 19-jun 22:08 servfich-sd JobId 53: 3301 Issuing autochanger "loaded? drive 0" command. 19-jun 22:08 servfich-sd JobId 53: 3302 Autochanger "loaded? drive 0", result is Slot 4. 19-jun 22:08 servfich-sd JobId 53: Error: block.c:995 Read error on fd=6 at file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error. 19-jun 22:08 servfich-sd JobId 53: Error: block.c:995 Read error on fd=6 at file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error. 19-jun 22:08 servfich-sd JobId 53: Error: block.c:995 Read error on fd=6 at file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error. 19-jun 22:08 servfich-sd JobId 53:
Error: block.c:995 Read error on fd=6 at file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error. 19-jun 22:08 servfich-sd JobId 53: Please mount Volume "A0000004" or label a new one for: Job: Backup_de_Trabajo_Diario.2008-06-19_22.00.39 Storage: "Driver1" (/dev/nst0) Pool: JuevesPool Media type: VXA-X23 19-jun 23:08 servfich-sd JobId 53: Please mount Volume "A0000004" or label a new one for: Job: Backup_de_Trabajo_Diario.2008-06-19_22.00.39 Storage: "Driver1" (/dev/nst0) Pool: JuevesPool
Media type: VXA-X23 20-jun 01:08 servfich-sd JobId 53: Please mount Volume "A0000004" or label a new one for: Job: Backup_de_Trabajo_Diario.2008-06-19_22.00.39 Storage: "Driver1" (/dev/nst0) Pool: JuevesPool Media type: VXA-X23 20-jun 05:08 servfich-sd JobId 53: Please mount Volume "A0000004" or label a new one for: Job: Backup_de_Trabajo_Diario.2008-06-19_22.00.39 Storage: "Driver1" (/dev/nst0) Pool: JuevesPool Media type: VXA-X23
I don't know why is it happening. I need
some help of you. Thanks a lot. --- El vie, 13/6/08, Javier Rodriguez <ungue79 AT yahoo DOT es> escribió:
De: Javier Rodriguez <ungue79 AT yahoo DOT es> Asunto: Re: [Bacula-users] Please mount Volume "A0000003" or label a new one for... Para: "John Drescher" <drescherjm AT gmail DOT com> Fecha: viernes, 13 junio, 2008 9:16
I know that, but this tape has been written once. Furthermore, i only had to type in bconcole unmount and after mount with the slot 3 which is where A0000003 is in, and everything ran fine.
Anyway, i'll see if
next week i have the same problem with that tape, If i have, then may be the tape doesn't work very well.
Thanks a lot.
--- El jue, 12/6/08, John Drescher <drescherjm AT gmail DOT com> escribió:
De: John Drescher <drescherjm AT gmail DOT com> Asunto: Re: [Bacula-users] Please mount Volume "A0000003" or label a new one for... Para: ungue79 AT yahoo DOT es, "baculausers" <Bacula-users AT lists.sourceforge DOT net> Fecha: jueves, 12 junio, 2008 2:56
> 12-jun 08:07 servfich-sd JobId 47: Error: block.c:995 Read error on fd=6 at > file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error. > 12-jun 08:07 servfich-sd JobId 47: Please mount Volume "A0000003" or label a > new one for: > You should not see this error on a tape that has been written to it unless the tape or
the drive is bad. If it is a never used tape this is a normal error because the drive will not let you read an unwritten tape.
John |
Enviado desde Correo Yahoo! La bandeja de entrada más inteligente.
|
Enviado desde Correo Yahoo! La bandeja de entrada más inteligente.
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php _______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: [Bacula-users] Please mount Volume "A0000003" or label a new one for...,
Javier Rodriguez <=
|
|
|