Hi,
28.04.2008 06:49, Maria McKinley wrote:
> Hello,
>
> My storage daemon quit, and I can't get it restarted. I believe it
> happened when I asked for the status of the storage daemon, after I had
> moved a volume from one pool to a different pool. The only message in
> the log is:
>
> 27-Apr 13:20 billie-sd JobId 517: 3307 Issuing autochanger "unload slot
> 5, drive 0" command.
> 27-Apr 13:21 ella-fd JobId 517: Fatal error: backup.c:892 Network send
> error to SD. ERR=Broken pipe
That's probably not the cause of the problem, only the result of it.
> This was undoubtedly caused by the daemon quitting, but there are no
> messages explaining why it quit, or why it won't restart. btape seems to
> work fine:
>
> billie:~# btape -c /etc/bacula/bacula-sd.conf /dev/st0
> Tape block granularity is 1024 bytes.
> btape: butil.c:285 Using device: "/dev/st0" for writing.
> 27-Apr 21:23 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0"
> command.
> 27-Apr 21:23 btape JobId 0: 3302 Autochanger "loaded? drive 0", result
> is Slot 9.
> 27-Apr 21:23 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0"
> command.
> 27-Apr 21:23 btape JobId 0: 3302 Autochanger "loaded? drive 0", result
> is Slot 9.
> btape: btape.c:372 open device "Drive-1" (/dev/st0): OK
>
> I then ran test, and everything succeeded, although I didn't run the
> autochanger test, because I didn't have a blank tape in slot 1, and I'm
> not on site to put one there. I can do that later in the week, if it is
> important.
>
> I am using Debian lenny, bacula 2.2.8-8, and backup has been working
> successfully for a very long time, so I am perplexed. I have an exabyte
> 10 tape changer, and can change tapes from the command line without any
> problems.
>
> configuration file is fine when I test with bacula-sd.
>
> I guess the first question is, how do I get the storage daemon to log
> info when it fails to start so I can figure out what is going wrong?
Well, you could try running the SD in foreground with debug output,
like '/path/to/bacula-sd -c /etc/bacula-sd.conf -f -d 50' and see what
that reports.
Arno
> thanks a bunch,
> maria
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
> Don't miss this year's exciting event. There's still time to save $100.
> Use priority code J8TL2D2.
> http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
--
Arno Lehmann
IT-Service Lehmann
www.its-lehmann.de
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
