At the moment, I've 3 backups that has been flushed. At all three of
them, amanda show me "*** THE DUMPS DID NOT FINISH PROPERLY!". But all
logfiles seems to be okay:

DISK amflush test.mynet /data
DISK amflush srv1.mynet /data
DISK amflush srv1.mynet /etc
DISK amflush srv1.mynet /var
START amflush date 20080807082315
START driver date 20080807082315
STATS driver startup time 0.012
START taper datestamp 20080807082315 label DailySet1-001 tape 0
SUCCESS taper test.mynet /data 20080729 1 [sec 6.938 kb 2944 kps 424.3
{wr: writers 92 rdwait 0.000 wrwait 0.036 filemark 6.901}]
SUCCESS taper srv1.mynet /data 20080729 2 [sec 34.533 kb 641856 kps
18586.6 {wr: writers 20058 rdwait 0.743 wrwait 29.223 filemark 4.506}]
SUCCESS taper srv1.mynet /var 20080729 2 [sec 27.319 kb 517664 kps
18948.8 {wr: writers 16177 rdwait 0.691 wrwait 24.682 filemark 1.895}]
SUCCESS taper srv1.mynet /etc 20080729 1 [sec 1.909 kb 96 kps 50.3 {wr:
writers 3 rdwait 0.000 wrwait 0.004 filemark 1.905}]
INFO taper tape DailySet1-001 kb 1162560 fm 4 [OK]

Well, I'm confused....

Andre




Paul Yeatman schrieb:
> Hi, I'm not often running amflush but I would still expect a log file
> to be generated in your log directory with more info.  How many backups
> on holding disk were you expecting this to have been flushing?
>
> Paul
>
> ->>In response to your message<<-
>   --received from Andre Brandt--
> >
> > Hi List!
> > 
> > I've setup my amanda backup server and everything seems to be fine -
> > running for some weeks without any problem. (Using amanda 2.5.p1 with a
> > HP tape library - 8 tapes). Well, because of a mistake - I've done - one
> > tape was missing an so, amanda wrote all dumps to the holding disk.
> > (like it should do)
> > 
> > After starting amflush, I got the following email:
> > 
> >     *** THE DUMPS DID NOT FINISH PROPERLY!
> > 
> >     The dumps were flushed to tape DailySet1-005.
> >     The next tape Amanda expects to use is: DailySet1-001.
> > 
> > 
> >     STATISTICS:
> >                               Total       Full      Incr.
> >                             --------   --------   --------
> >     Estimate Time (hrs:min)    0:00
> >     Run Time (hrs:min)         0:01
> >     Dump Time (hrs:min)        0:00       0:00       0:00
> >     Output Size (meg)           0.0        0.0        0.0
> >     Original Size (meg)         0.0        0.0        0.0
> >     Avg Compressed Size (%)     --         --         -- 
> >     Filesystems Dumped            0          0          0
> >     Avg Dump Rate (k/s)         --         --         -- 
> > 
> >     Tape Time (hrs:min)        0:01       0:00       0:01
> >     Tape Size (meg)           568.2        0.0      568.2
> >     Tape Used (%)               0.3        0.0        0.3   (level:#disks 
> > ...)
> >     Filesystems Taped             4          0          4   (1:2 2:2)
> > 
> >     Chunks Taped                  0          0          0
> >     Avg Tp Write Rate (k/s) 12663.8        --     12663.8
> > 
> >     USAGE BY TAPE:
> >       Label                      Time      Size      %    Nb    Nc
> >       DailySet1-005       0:01   581888k    0.3     4     0
> > 
> >     NOTES:
> >       taper: tape DailySet1-005 kb 581888 fm 4 [OK]
> > 
> > 
> >     DUMP SUMMARY:
> >                                            DUMPER STATS               TAPER 
> > STATS 
> >     HOSTNAME     DISK        L ORIG-kB  OUT-kB  COMP%  MMM:SS   KB/s MMM:SS 
> >   KB/s
> >     -------------------------- ------------------------------------- 
> > -------------
> >     test.mynet /data       1     N/A    2944    --     N/A    N/A    0:07  
> > 425.6
> >     srv1.mynet /data       2     N/A   97600    --     N/A    N/A    0:11 
> > 8652.0
> >     srv1.mynet /etc        1     N/A      96    --     N/A    N/A    0:02   
> > 50.3
> >     srv1.mynet /var        2     N/A  481248    --     N/A    N/A    0:26 
> > 18620.1
> > 
> >     (brought to you by Amanda version 2.5.1p1)
> > 
> > 
> > Well, what is wrong? I don't understand, what amanda want's to tell me :(
> > 
> > Thx!
> > 
> > Andre
> > 
> > 
> > 
>
>