Hi
Looks a firewall of networking issue.
What happenes if you do this on server?
Any other clients it works on?
And a look in the amanda log files for clues - normally /tmp/amanda.
--
Martin Hepworth
Snr Systems Administrator
Solid State Logic
Tel: +44 (0)1865 842300
> -----Original Message-----
> From: owner-amanda-users AT amanda DOT org
> [mailto:owner-amanda-users AT amanda DOT org] On Behalf Of aminukapon
> Sent: 24 July 2008 05:05
> To: amanda-users AT amanda DOT org
> Subject: Amrecover error
>
> Hello all,
>
> I need help with this problem:....
>
> I tried running amrecover on the client and get the following errors
>
> root@amanda: amrecover DailySet1
> AMRECOVER Version 2.5.2p1. Contacting server on fubini ...
> [request failed: timeout waiting for ACK]
>
>
> My amanda.conf looks like this
>
> #
> # amanda.conf - sample Amanda configuration file.
> #
> # If your configuration is called, say, "DailySet1", then
> this file # normally goes in /etc/amanda/DailySet1/amanda.conf.
> #
> # You need to edit this file to suit your needs. See the
> documentation in # this file, in the "man amanda" man page,
> in the /usr/share/docs/amanda* # directories, and on the web
> at www.amanda.org for more information.
> #
>
> org "Glasslab" # your organization name for reports mailto
> "aminukapon AT yahoo DOT com" # space separated list of operators at
> your site dumpuser "backup" # the user to run dumps under
>
> inparallel 4 # maximum dumpers that will run in parallel (max
> 63) # this maximum can be increased at compile-time, #
> modifying MAX_DUMPERS in server-src/driverio.h dumporder
> "sssS" # specify the priority order of each dumper
> # s -> smallest size
> # S -> biggest size
> # t -> smallest time
> # T -> biggest time
> # b -> smallest bandwitdh
> # B -> biggest bandwitdh
> # try "BTBTBTBTBTBT" if you are not holding # disk constrained
>
> taperalgo first # The algorithm used to choose which dump
> image to send # to the taper.
>
> # Possible values:
> # [first|firstfit|largest|largestfit|smallest|last]
> # Default: first.
>
> # first First in - first out.
> # firstfit The first dump image that will fit on # the current tape.
> # largest The largest dump image.
> # largestfit The largest dump image that will fit on # the
> current tape.
> # smallest The smallest dump image.
> # last Last in - first out.
>
> displayunit "k" # Possible values: "k|m|g|t"
> # Default: k.
> # The unit used to print many numbers.
> # k=kilo, m=mega, g=giga, t=tera
>
> netusage 600 Kbps # maximum net bandwidth for Amanda, in KB per sec
>
> dumpcycle 4 weeks # the number of days in the normal dump cycle
> runspercycle 20 # the number of amdump runs in dumpcycle days
> # (4 weeks * 5 amdump runs per week -- just weekdays)
> tapecycle 25 tapes # the number of tapes in rotation # 4
> weeks (dumpcycle) times 5 tapes per week (just # the
> weekdays) plus a few to handle errors that # need amflush and
> so we do not overwrite the full # backups performed at the
> beginning of the previous # cycle
>
> bumpsize 20 Mb # minimum savings (threshold) to bump level 1
> -> 2 bumppercent 20 # minimum savings (threshold) to bump
> level 1 -> 2 bumpdays 1 # minimum days at each level bumpmult
> 4 # threshold = bumpsize * bumpmult^(level-1)
>
> etimeout 300 # number of seconds per filesystem for estimates.
> #etimeout -600 # total number of seconds for estimates.
> # a positive number will be multiplied by the number of
> filesystems on # each host; a negative number will be taken
> as an absolute total time-out.
> # The default is 5 minutes per filesystem.
>
> dtimeout 1800 # number of idle seconds before a dump is aborted.
>
> ctimeout 30 # maximum number of seconds that amcheck waits #
> for each client host
>
> tapebufs 20
> # A positive integer telling taper how many 32k buffers to allocate.
> # WARNING! If this is set too high, taper will not be able to
> allocate # the memory and will die. The default is 20 (640k).
>
>
> # Specify tape device and/or tape changer. If you don't have
> a tape # changer, and you don't want to use more than one
> tape per run of # amdump, just comment out the definition of
> tpchanger.
>
> # Some tape changers require tapedev to be defined; others
> will use # their own tape device selection mechanism. Some
> use a separate tape # changer device (changerdev), others
> will simply ignore this # parameter. Some rely on a
> configuration file (changerfile) to # obtain more information
> about tape devices, number of slots, etc; # others just need
> to store some data in files, whose names will start # with
> changerfile. For more information about individual tape #
> changers, read docs/TAPE.CHANGERS.
>
> # At most one changerfile entry must be defined; select the
> most # appropriate one for your configuration. If you select
> man-changer, # keep the first one; if you decide not to use a
> tape changer, you may # comment them all out.
>
> runtapes 1 # number of tapes to be used in a single run of
> amdump tpchanger "chg-disk" # the tape-changer glue script
> tapedev "file:/backups/DailySet1/slots" # the no-rewind tape
> device to be used rawtapedev "@DEFAULT_RAW_TAPE_DEVICE@" #
> the raw device to be used (ftape only) #changerfile
> "/etc/amanda/DailySet1/changer"
> #changerfile "/etc/amanda/DailySet1/changer-status"
> changerfile "/etc/amanda/DailySet1/changer"
> changerdev "@DEFAULT_CHANGER_DEVICE@"
>
> # If you want Amanda to automatically label any non-Amanda
> tapes it # encounters, uncomment the line below. Note that
> this will ERASE any # non-Amanda tapes you may have, and may
> also ERASE any near-failing tapes.
> # Use with caution.
> ## label_new_tapes "DailySet1-%%%"
>
> maxdumpsize -1 # Maximum number of bytes the planner will
> schedule # for a run (default: runtapes * tape_length).
> tapetype HARDDISK # what kind of tape it is (see tapetypes
> below) #labelstr "^DailySet1-[0-9][0-9]*$" # label constraint
> regex: all tapes must match
>
> amrecover_do_fsf yes # amrecover will call amrestore with the
> # -f flag for faster positioning of the tape.
> amrecover_check_label yes # amrecover will call amrestore
> with the # -l flag to check the label.
> amrecover_changer "changer" # amrecover will use the changer
> if you restore # from this device.
> # It could be a string like 'changer' and # amrecover will
> use your changer if you # set your tape with 'settape changer'
>
> # Specify holding disks. These are used as a temporary
> staging area for # dumps before they are written to tape and
> are recommended for most sites.
> # The advantages include: tape drive is more likely to
> operate in streaming # mode (which reduces tape and drive
> wear, reduces total dump time); multiple # dumps can be done
> in parallel (which can dramatically reduce total dump time.
> # The main disadvantage is that dumps on the holding disk
> need to be flushed # (with amflush) to tape after an
> operating system crash or a tape failure.
> # If no holding disks are specified then all dumps will be
> written directly # to tape. If a dump is too big to fit on
> the holding disk than it will be # written directly to tape.
> If more than one holding disk is specified then # they will
> all be used based on activity and available space.
>
> holdingdisk hd1 {
> comment "main holding disk"
> directory "/dumps/amanda" # where the holding disk is
> use -100 Mb # how much space can we use on it # a
> non-positive value means:
> # use all space but that value
> chunksize 1Gb # size of chunk if you want big dump to be #
> dumped on multiple files on holding disks # N Kb/Mb/Gb split
> images in chunks of size N
> # The maximum value should be
> # (MAX_FILE_SIZE - 1Mb)
> # 0 same as INT_MAX bytes
> }
> #holdingdisk hd2 {
> # directory "/dumps2/amanda"
> # use 1000 Mb
> # }
> #holdingdisk hd3 {
> # directory "/mnt/disk4"
> # use 1000 Mb
> # }
>
>
> # If amanda cannot find a tape on which to store backups, it
> will run # as many backups as it can to the holding disks.
> In order to save # space for unattended backups, by default,
> amanda will only perform # incremental backups in this case,
> i.e., it will reserve 100% of the # holding disk space for
> the so-called degraded mode backups.
> # However, if you specify a different value for the `reserve'
> # parameter, amanda will not degrade backups if they will fit
> in the # non-reserved portion of the holding disk.
>
> # reserve 30 # percent
> # This means save at least 30% of the holding disk space for
> degraded # mode backups.
>
> autoflush no #
> # if autoflush is set to yes, then amdump will schedule all
> dump on # holding disks to be flush to tape during the run.
>
> # The format for a ColumnSpec is a ',' seperated list of triples.
> # Each triple consists of
> # + the name of the column (as in ColumnNameStrings)
> # + prefix before the column
> # + the width of the column, if set to -1 it will be recalculated
> # to the maximum length of a line to print.
> # Example:
> # "Disk=1:17,HostName=1:10,OutKB=1:7"
> # or
> # "Disk=1:-1,HostName=1:10,OutKB=1:7"
> #
> # You need only specify those colums that should be changed
> from # the default. If nothing is specified in the
> configfile, the # above compiled in values will be in effect,
> resulting in an # output as it was all the time.
> # The names of the colums are:
> # HostName, Disk, Level, OrigKB, OutKB, Compress, DumpTime,
> DumpRate, # TapeTime and TapeRate.
> # ElB, 1999-02-24.
> # columnspec "Disk=1:18,HostName=0:10,OutKB=1:7"
>
>
> # Amanda needs a few Mb of diskspace for the log and debug
> files, # as well as a database. This stuff can grow large,
> so the conf directory # isn't usually appropriate. Some
> sites use /usr/local/var and some /usr/adm.
> # Create an amanda directory under there. You need a
> separate infofile and # logdir for each configuration, so
> create subdirectories for each conf and # put the files
> there. Specify the locations below.
>
> # Note that, although the keyword below is infofile, it is
> only so for # historic reasons, since now it is supposed to
> be a directory (unless # you have selected some database
> format other than the `text' default) infofile
> "/etc/amanda/DailySet1/curinfo" # database DIRECTORY
> logdir "/etc/amanda/DailySet1" # log directory
> indexdir "/etc/amanda/DailySet1/index" # index directory
> #tapelist "@CONFIG_DIR/DailySet1/tapelist" # list of used
> tapes # tapelist is stored, by default, in the directory that
> contains amanda.conf
>
> # tapetypes
>
> # Define the type of tape you use here, and use it in "tapetype"
> # above. Some typical types of tapes are included here. The
> tapetype # tells amanda how many MB will fit on the tape, how
> big the filemarks # are, and how fast the tape device is.
>
> # A filemark is the amount of wasted space every time a tape
> section # ends. If you run `make tapetype' in tape-src,
> you'll get a program # that generates tapetype entries, but
> it is slow as hell, use it only # if you really must and, if
> you do, make sure you post the data to # the amanda mailing
> list, so that others can use what you found out # by
> searching the archives.
>
> # For completeness Amanda should calculate the inter-record
> gaps too, # but it doesn't. For EXABYTE and DAT tapes this
> is ok. Anyone using # 9 tracks for amanda and need IRG
> calculations? Drop me a note if # so.
>
> # If you want amanda to print postscript paper tape labels #
> add a line after the comment in the tapetype of the form
> # lbl-templ "/path/to/postscript/template/label.ps"
>
> # if you want the label to go to a printer other than the
> default # for your system, you can also add a line above for
> a different # printer. (i usually add that line after the
> dumpuser specification)
>
> # dumpuser "operator" # the user to run dumps under
> # printer "mypostscript" # printer to print paper label on
>
> # here is an example of my definition for an EXB-8500
>
> # define tapetype EXB-8500 {
> # ...
> # lbl-templ "/etc/amanda/config/lbl.exabyte.ps"
> # }
>
>
> define tapetype QIC-60 {
> comment "Archive Viper"
> length 60 mbytes
> filemark 100 kbytes # don't know a better value
> speed 100 kbytes # dito
> }
>
> define tapetype DEC-DLT2000 {
> comment "DEC Differential Digital Linear Tape 2000"
> length 15000 mbytes
> filemark 8 kbytes
> speed 1250 kbytes
> }
>
> # goluboff AT butch.Colorado DOT EDU
> # in amanda-users (Thu Dec 26 01:55:38 MEZ 1996) define tapetype DLT {
> comment "DLT tape drives"
> length 20000 mbytes # 20 Gig tapes
> filemark 2000 kbytes # I don't know what this means
> speed 1536 kbytes # 1.5 Mb/s
> }
>
> define tapetype SURESTORE-1200E {
> comment "HP AutoLoader"
> length 3900 mbytes
> filemark 100 kbytes
> speed 500 kbytes
> }
>
> define tapetype EXB-8500 {
> comment "Exabyte EXB-8500 drive on decent machine"
> length 4200 mbytes
> filemark 48 kbytes
> speed 474 kbytes
> }
>
> define tapetype EXB-8200 {
> comment "Exabyte EXB-8200 drive on decent machine"
> length 2200 mbytes
> filemark 2130 kbytes
> speed 240 kbytes
> }
>
> define tapetype HARDDISK {
> comment "DAT tape drives"
> # data provided by Rob Browning <rlb AT cs.utexas DOT edu>
> length 2000 mbytes
> filemark 111 kbytes
> speed 468 kbytes
> }
>
> define tapetype DAT {
> comment "DAT tape drives"
> length 1000 mbytes # these numbers are not accurate
> filemark 100 kbytes # but you get the idea
> speed 100 kbytes
> }
>
> define tapetype MIMSY-MEGATAPE {
> comment "Megatape (Exabyte based) drive through Emulex on Vax 8600"
> length 2200 mbytes
> filemark 2130 kbytes
> speed 170 kbytes # limited by the Emulex bus interface, ugh }
>
>
> # dumptypes
> #
> # These are referred to by the disklist file. The dumptype
> specifies # certain parameters for dumping including:
> # auth - authentication scheme to use between server and client.
> # Valid values are "bsd", "krb4", "krb5" and "ssh".
> # Default: [auth bsd]
> # comment - just a comment string
> # comprate - set default compression rate. Should be
> followed by one or
> # two numbers, optionally separated by a comma. The 1st is
> # the full compression rate; the 2nd is the incremental rate.
> # If the second is omitted, it is assumed equal to the first.
> # The numbers represent the amount of the original file the
> # compressed file is expected to take up.
> # Default: [comprate 0.50, 0.50]
> # compress - specify compression of the backed up data.
> Valid values are:
> # "none" - don't compress the dump output.
> # "client best" - compress on the client using the best (and
> # probably slowest) algorithm.
> # "client fast" - compress on the client using fast algorithm.
> # "client custom" - compress using your custom
> client compression program.
> # use client_custom_compress "PROG" to specify
> # the custom compression program.
> # PROG must not contain white space.
> # "server best" - compress on the tape host using the best
> (and # probably slowest) algorithm.
> # "server fast" - compress on the tape host using a fast #
> algorithm. This may be useful when a fast # tape host is
> backing up slow clients.
> # "server custom" - compress using your server
> custom compression program.
> # use server_custom_compress "PROG" to specify
> # the custom compression program.
> # PROG must not contain white space.
> # Default: [compress client fast]
> # dumpcycle - set the number of days in the dump cycle, ie,
> set how often a
> # full dump should be performed. Default: from DUMPCYCLE above
> # estimate Determine the way AMANDA does it's estimate.
> # "client" - Use the same program as the dumping program, #
> this is the most accurate way to do estimates, # but it can
> take a long time.
> # "calcsize" - Use a faster program to do estimates, but the
> # result is less accurate.
> # "server" - Use only statistics from the previous run to #
> give an estimate, # it takes only a few seconds but the
> result is not # accurate if your disk usage changes from day to day.
> # Default: [client]
> # encrypt - specify encryption of the backed up data.
> Valid values are:
> # "none" - don't encrypt the dump output.
> # "client" - encrypt on the client using the program specified by
> # client_encrypt "PROG".
> # Use client_decrypt_option to specify the decrypt-
> # parameter, default is "-d".
> # PROG and decrypt-parameter must
> not contain white space.
> # "server" - encrypt on the server using the program specified by
> # server_encrypt "PROG".
> # Use server_decrypt_option to
> specify the decrypt-
> # parameter, default is "-d".
> # PROG and decrypt-parameter must
> not contain white space.
> # Default: [none]
> # exclude - specify files and directories to be excluded
> from the dump.
> # Useful with gnutar only; silently ignored by dump and samba.
> # Valid values are:
> # "pattern" - a shell glob pattern defining which files
> # to exclude.
> # gnutar gets --exclude="pattern"
> # list "filename" - a file (on the client!) containing patterns
> # re's (1 per line) defining which files to
> # exclude.
> # gnutar gets --exclude-from="filename"
> # Note that the `full pathname' of a file within its #
> filesystem starts with `./', because of the way amanda runs #
> gnutar: `tar -C $mountpoint -cf - --lots-of-options .' (note
> # the final dot!) Thus, if you're backing up `/usr' with a
> # diskfile entry like ``host /usr gnutar-root', but you
> don't # want to backup /usr/tmp, your exclude list should
> contain # the pattern `./tmp', as this is relative to the
> `/usr' above.
> # Please refer to the man-page of gnutar for more information.
> # If a relative pathname is specified as the exclude list, #
> it is searched from within the directory that is # going to
> be backed up.
> # Default: include all files
> # holdingdisk - should the holding disk be used for this
> dump. Useful for
> # dumping the holding disk itself. Default: [holdingdisk yes]
> # ignore - do not back this filesystem up. Useful for
> sharing a single
> # disklist in several configurations.
> # index - keep an index of the files backed up. Default: [index no]
> # kencrypt - encrypt the data stream between the client and server.
> # Default: [kencrypt no]
> # maxdumps - max number of concurrent dumps to run on the client.
> # Default: [maxdumps 1]
> # maxpromoteday - max number of day for a promotion, set it
> 0 if you don't
> # want promotion, set it to 1 or 2 if your disk get # overpromoted.
> # Default: [10000]
> # priority - priority level of the dump. Valid levels are
> "low", "medium"
> # or "high". These are really only used when Amanda has no
> # tape to write to because of some error. In that "degraded
> # mode", as many incrementals as will fit on the holding
> disk # are done, higher priority first, to insure the
> important # disks are at least dumped. Default: [priority medium]
> # program - specify the dump system to use. Valid values
> are "DUMP" and
> # "GNUTAR". Default: [program "DUMP"].
> # record - record the backup in the time-stamp-database of
> the backup
> # program (e.g. /etc/dumpdates for DUMP or #
> @GNUTAR_LISTED_INCREMENTAL_DIRX@ for GNUTAR.).
> # Default: [record yes]
> # skip-full - skip the disk when a level 0 is due, to allow
> full backups
> # outside Amanda, eg when the machine is in single-user mode.
> # skip-incr - skip the disk when the level 0 is NOT due.
> This is used in
> # archive configurations, where only full dumps are done and
> # the tapes saved.
> # starttime - delay the start of the dump? Default: no delay
> # strategy - set the dump strategy. Valid strategies are currently:
> # "standard" - the standard one.
> # "nofull" - do level 1 dumps every time. This can be used,
> # for example, for small root filesystems that
> # only change slightly relative to a site-wide
> # prototype. Amanda then backs up just the
> # changes.
> # "noinc" - do level 0 dumps every time.
> # "skip" - skip all dumps. Useful for sharing a single
> # disklist in several configurations.
> # "incronly" - do only incremental dumps. This is similar
> # to strategy 'nofull', but will increase
> # the dump level as usual. Full
> dumps will
> # only be performed when an
> 'amadmin force'
> # has been issued
> # Default: [strategy standard]
> # tape_splitsize - (optional) split dump file into pieces of
> a specified size.
> # This allows dumps to be spread across multiple tapes, and
> can # potentially make more efficient use of tape space.
> Note that # if this value is too large (more than half the
> size of the # average dump being split), substantial tape
> space can be # wasted. If too small, large dumps will be
> split into # innumerable tiny dumpfiles, adding to
> restoration complexity.
> # A good rule of thumb, usually, is 1/10 of the size of your
> # tape. Default: [disabled] # split_diskbuffer - (optional)
> When dumping a split dump in PORT-WRITE
> # mode (usually meaning "no holding disk"),
> buffer the split
> # chunks to a file in the directory specified by this option.
> # Default: [none]
> # fallback_splitsize - (optional) When dumping a split dump
> in PORT-WRITE
> # mode, if no split_diskbuffer is specified
> (or if we somehow
> # fail to use our split_diskbuffer), we must
> buffer split
> # chunks in memory. This specifies the
> maximum size split
> # chunks can be in this scenario, and thus
> the maximum amount
> # of memory consumed for in-memory splitting.
> Default: [10m]
> #
> # Note that you may specify previously defined dumptypes as a
> shorthand way of # defining parameters.
>
> define dumptype global {
> comment "Global definitions"
> # This is quite useful for setting global parameters, so
> you don't have
> # to type them everywhere. All dumptype definitions in
> this sample file
> # do include these definitions, either directly or indirectly.
> # There's nothing special about the name `global'; if you
> create any
> # dumptype that does not contain the word `global' or the
> name of any
> # other dumptype that contains it, these definitions won't apply.
> # Note that these definitions may be overridden in other
> # dumptypes, if the redefinitions appear *after* the `global'
> # dumptype name.
> # You may want to use this for globally enabling or disabling
> # indexing, recording, etc. Some examples:
> # index yes
> # record no
> # split_diskbuffer "/raid/amanda"
> # fallback_splitsize 64m
> #auth "bsdtcp"
> }
>
> define dumptype always-full {
> global
> comment "Full dump of this filesystem always"
> compress none
> priority high
> dumpcycle 0
> }
>
> define dumptype root-tar {
> global
> program "GNUTAR"
> comment "root partitions dumped with tar"
> compress none
> index
> # exclude list "/etc/amanda/exclude.gtar"
> priority low
> }
>
> define dumptype user-tar {
> root-tar
> comment "user partitions dumped with tar"
> priority medium
> }
>
> define dumptype user-tar-span {
> root-tar
> tape_splitsize 3 Gb
> comment "tape-spanning user partitions dumped with tar"
> priority medium
> }
>
> define dumptype high-tar {
> root-tar
> comment "partitions dumped with tar"
> priority high
> }
>
> define dumptype comp-root-tar {
> root-tar
> comment "Root partitions with compression"
> compress client fast
> }
>
> define dumptype comp-user-tar {
> user-tar
> compress client fast
> #auth "bsdtcp"
> }
>
> define dumptype comp-user-tar-span {
> user-tar-span
> compress client fast
> }
>
> define dumptype holding-disk {
> global
> comment "The master-host holding disk itself"
> holdingdisk no # do not use the holding disk
> priority medium
> }
>
> define dumptype comp-user {
> global
> comment "Non-root partitions on reasonably fast machines"
> compress client fast
> priority medium
> }
>
> define dumptype comp-user-span {
> global
> tape_splitsize 5 Gb
> comment "Tape-spanning non-root partitions on reasonably
> fast machines"
> compress client fast
> priority medium
> }
>
> define dumptype nocomp-user {
> comp-user
> comment "Non-root partitions on slow machines"
> compress none
> }
>
> define dumptype nocomp-user-span {
> comp-user-span
> comment "Tape-spanning non-root partitions on slow machines"
> compress none
> }
>
> define dumptype comp-root {
> global
> comment "Root partitions with compression"
> compress client fast
> priority low
> }
>
> define dumptype nocomp-root {
> comp-root
> comment "Root partitions without compression"
> compress none
> }
>
> define dumptype comp-high {
> global
> comment "very important partitions on fast machines"
> compress client best
> priority high
> }
>
> define dumptype nocomp-high {
> comp-high
> comment "very important partitions on slow machines"
> compress none
> }
>
> define dumptype nocomp-test {
> global
> comment "test dump without compression, no /etc/dumpdates
> recording"
> compress none
> record no
> priority medium
> }
>
> define dumptype comp-test {
> nocomp-test
> comment "test dump with compression, no /etc/dumpdates recording"
> compress client fast
> }
>
> define dumptype custom-compress {
> global
> program "GNUTAR"
> comment "test dump with custom client compression"
> compress client custom
> client_custom_compress "/usr/bin/bzip2"
> }
>
> define dumptype encrypt-fast {
> global
> program "GNUTAR"
> comment "test dump with fast client compression and server
> symmetric encryption"
> compress client fast
> encrypt server
> server_encrypt "/usr/local/sbin/amcrypt"
> server_decrypt_option "-d"
> }
>
> # network interfaces
> #
> # These are referred to by the disklist file. They define
> the attributes # of the network interface that the remote
> machine is accessed through.
> # Notes: - netusage above defines the attributes that are
> used when the
> # disklist entry doesn't specify otherwise.
> # - the values below are only samples.
> # - specifying an interface does not force the traffic to pass
> # through that interface. Your OS routing tables do
> that. This
> # is just a mechanism to stop Amanda trashing your network.
> # Attributes are:
> # use - bandwidth above which amanda won't start # backups
> using this interface. Note that if # a single backup will
> take more than that, # amanda won't try to make it run slower!
>
> define interface local {
> comment "a local disk"
> use 1000 kbps
> }
>
> define interface le0 {
> comment "10 Mbps ethernet"
> use 400 kbps
> }
>
> # You may include other amanda configuration files, so you
> can share # dumptypes, tapetypes and interface definitions
> among several # configurations.
>
> #includefile "/etc/amanda/amanda.conf.main"
>
>
> disklist looks like this
>
> # sample Amanda2 disklist file, derived from CS.UMD.EDU's
> disklist # # If your configuration is called, say,
> "DailySet1", then this file # normally goes in
> /etc/amanda/DailySet1/disklist.
> #
> # File format is:
> #
> amanda /home_test comp-user-tar
> # localhost /home_test comp-user-tar
> #
> # where the dumptypes are defined by you in amanda.conf.
>
>
> # At our site, root partitions have a different dumptype
> because they # are of lower priority; they don't contain user
> data, and don't change # much from the department prototype.
> In a crunch, they can be left for # last or skipped.
>
> # hda2 comp-user
>
> # A SPARCstation 1+
> #salty sd0a comp-root
> #salty sd0g comp-user
> #salty sd1g comp-user
> #salty sd2a comp-root
> #salty sd2g comp-user
> #salty sd3c comp-user
>
> # A DECstation 3100
> #slithy rz1a comp-root
> #slithy rz1g comp-user
> #slithy rz3a comp-root
> #slithy rz3g comp-user
>
> # We don't run compression on the master host since it is
> going to be # busy enough running amanda.
> #master sd0a nocomp-root
> #master sd0g nocomp-user
> # the holding disk can't be dumped to itself, it uses a
> disktype that # specifies the "no-hold" option (see amanda.conf).
> #master sd1c holding-disk
>
> # The chairman's disk is high priority to make sure it gets done.
> #bigwig sd0a comp-root
> #bigwig sd0g comp-high
> # Likewise the named databases in the root partition on our
> primary # nameserver. Also, compression is turned off
> because we don't want # to create any unnecessary load on
> this baby (it's only a Sun3).
> #bozo sd0a nocomp-high
> #bozo sd0g nocomp-user
> #bozo sd4c nocomp-user
>
> # Dump Joe's NetBSD machine, with the mounted MS-DOS
> partition dumped # using tar.
> #joespc wd0a comp-root
> #joespc wd0e comp-user
> #joespc /msdos comp-user-tar
>
> # Some really slow machines, like Sun2's and some
> Vaxstations, take # forever to compress their dumps: it's
> just not worth it.
>
> # A Sun2
> #cleo sd0a nocomp-root
> #cleo sd0g nocomp-user
> # A VaxStation
> #susie rz8a nocomp-root
> #susie rz8g nocomp-user
>
> # and so on ... well, you get the idea
>
>
>
>
>
>
**********************************************************************
Confidentiality : This e-mail and any attachments are intended for the
addressee only and may be confidential. If they come to you in error
you must take no action based on them, nor must you copy or show them
to anyone. Please advise the sender by replying to this e-mail
immediately and then delete the original from your computer.
Opinion : Any opinions expressed in this e-mail are entirely those of
the author and unless specifically stated to the contrary, are not
necessarily those of the author's employer.
Security Warning : Internet e-mail is not necessarily a secure
communications medium and can be subject to data corruption. We advise
that you consider this fact when e-mailing us.
Viruses : We have taken steps to ensure that this e-mail and any
attachments are free from known viruses but in keeping with good
computing practice, you should ensure that they are virus free.
Red Lion 49 Ltd T/A Solid State Logic
Registered as a limited company in England and Wales
(Company No:5362730)
Registered Office: 25 Spring Hill Road, Begbroke, Oxford OX5 1RU,
United Kingdom
**********************************************************************
|
