Re: amanda and IBM 3573-TL
2006-10-17 13:21:43
Giuseppe,
Try using chg-zd-mtx. We have tested with this library using "mtx" changer.
Thanks, Paddy
On 10/17/06, Giuseppe Sacco
<giuseppe AT eppesuigoccas.homedns DOT org> wrote:
Hi all, I would like to setup a backup using amanda on a Linux SLES9 machine connected to an IBM tape library 3573 with a drive ULT3580-TD3. The library is connected via a FC HBA and is working fine since the IBM test
utility run correctly (I also updated the TL firmware and the driver firmware using the IBM utility).
I am trying to setup amanda using a tape changer, chg-scsi, but its "-scan" method does not list any device.
Using strace I found that chg-scsi try to open /dev/sg but this device node does not exists. Is this correct? Shouldn't is use /dev/sg0 instead?
Thanks a lot, Giuseppe
--
Amanda documentation: http://wiki.zmanda.com Amanda forums: http://forums.zmanda.com
|
|
|