|
Re: No Level 0 backup possible
2006-06-17 13:56:39
On Sat, Jun 17, 2006 at 04:57:56PM +0100, Anne Wilson wrote:
> Scenario -
>
> Backup server: borg
> Two drives - source from hda backed up by amanda to hdb.
> Requirement: /home, less directories /home/anne/Photos
> and /home/anne/recordings.
>
> The two excluded directories run as separate jobs, and cycle correctly. The
> main /home directory is approx. 24GB long, but after the excludes only about
> 6 GB. /tmp/dumps is an 11GB directory designated as holding disk. I want to
> save the backups onto vtapes that are suitable size for copying to DVD.
> ***********
>
> /home/amanda.exclude:
> ./anne/recordings
> ./anne/Photos
> **************
> From amanda.conf:
>
> org "xxxx"
> mailto "anne@xxxx"
>
> dumpuser "amanda" # the user to run dumps under
>
> inparallel 8 # maximum dumpers that will run in parallel (max 63)
> # this maximum can be increased at compile-time,
> # modifying MAX_DUMPERS in server-src/driverio.h
>
> maxdumps 4 # allowing one per disk make sense to me
>
> taperalgo largestfit # will help fill tapes if runtapes >1!
>
> netusage 800 Kbps # maximum net bandwidth for Amanda, in KB per sec
>
> dumpcycle 7 # The number of days in the normal dump cycle
> runspercycle 7 # the number of amdump runs in dumpcycle days
> # (4 weeks * 5 amdump runs per week -- just weekdays)
>
>
> tapecycle 21 tapes # the number of tapes in rotation
> dumporder "SSTT" # specify the priority order of each dumper
>
> bumpsize 10 Mb # minimum savings (threshold) to bump level 1
> -> 2
> bumpdays 1 # minimum days at each level
> bumpmult 2 # threshold = bumpsize * bumpmult^(level-1)
>
> etimeout 800 # number of seconds per filesystem for estimates.
>
> dtimeout 1500 # number of idle seconds before a dump is aborted.
>
> ctimeout 8 # maximum number of seconds that amcheck waits
> # for each client host
>
> tapebufs 80
>
>
> runtapes 10 # number of tapes to be used in a single run of
> amdump
>
> tpchanger "chg-disk"
>
> tapedev "file:/Backup/amandatapes/Dailys" # the no-rewind
> tape device to be
> used
>
> changerdev "/dev/null"
>
> changerfile "/usr/local/etc/amanda/Daily/chg-disk"
>
> tapetype HARD-DISK
> labelstr "^Dailys-[0-9][0-9]*$" # label constraint regex: all tapes
> must match
>
> #Some boolean variables
> autoflush yes
> amrecover_do_fsf yes # amrecover will call amrestore with the
> # -f flag for faster positioning of the tape.
> amrecover_check_label yes # amrecover will call amrestore with the
> # -l flag to check the label.
>
> amrecover_changer "chg-disk" # amrecover will use the changer if you restore
> # from this device.
>
> # holdingdisk no
>
> holdingdisk hd1 {
> comment "main holding disk"
> directory "/tmp/dumps" # where the holding disk is
> use -500 Mb # how much space can we use on it
> # a non-positive value means:
> # use all space but that value
> chunksize 500 Mb # size of chunk if you want big dump to be
> # dumped on multiple files on holding disks
> # N Kb/Mb/Gb split images in chunks of size N
> # The maximum value should be
> # (MAX_FILE_SIZE - 1Mb)
> # 0 same as INT_MAX bytes
> }
>
> reserve 20 # percent
> columnspec
> "HostName=0:7,Disk=1:32,Level=1:2,OrigKB=1:6,OutKB=1:6,Compress=1:5,DumpTime=1:5,DumpRate=1:7,TapeTime=1:5,TapeRate=1:7"
> displayunit "m"
> infofile "/usr/local/var/amanda/Daily/curinfo" # database DIRECTORY
> logdir "/usr/local/var/amanda/Daily" # log directory
> indexdir "/usr/local/var/amanda/Daily/index" # index directory
> tapelist "/usr/local/etc/amanda/Daily/tapelist" # list of used tapes
>
> define tapetype HARD-DISK {
> comment "WD 120GB drive hdb6"
> lbl-templ "/usr/local/etc/amanda/Daily/3hole.ps"
> length 4100 mbytes # will burn to DVD
> }
>
> define dumptype global {
> comment "Global definitions"
> index yes
> # record no
> tape_splitsize 400 Mb
> # split_diskbuffer "/tmp/dumps"
> fallback_splitsize 100m
> maxpromoteday 1
> }
> **********
> /usr/local/var/amanda/Daily/log.20060617.4
>
> START driver date 20060617
> DISK planner borg /home
> DISK planner borg /home/anne/Photos
> DISK planner borg /Public
> START planner date 20060617
> STATS driver startup time 0.084
> INFO planner borg /home 20060617 0 [dump larger than available tape space,
> 4556975 KB, full dump delayed]
> FINISH planner date 20060617 time 3.387
> START taper datestamp 20060617 label Dailys-6 tape 0
> SUCCESS dumper borg /home 20060617 5 [sec 19.738 kb 19057 kps 965.5 orig-kb
> 104890]
> SUCCESS chunker borg /home 20060617 5 [sec 19.696 kb 19057 kps 969.2]
> SUCCESS taper borg /home 20060617 5 [sec 0.237 kb 19104 kps 80575.3 {wr:
> writers 597 rdwait 0.000 wrwait 0.147 filemark 0.000}]
> SUCCESS dumper borg /home/anne/Photos 20060617 1 [sec 0.386 kb 3700 kps
> 9577.0
> orig-kb 3700]
> SUCCESS chunker borg /home/anne/Photos 20060617 1 [sec 0.389 kb 3700 kps
> 9591.2]
> SUCCESS taper borg /home/anne/Photos 20060617 1 [sec 0.040 kb 3744 kps
> 91576.2
> {wr: writers 117 rdwait 0.000 wrwait 0.025 filemark 0.000}]
> SUCCESS dumper borg /Public 20060617 1 [sec 0.050 kb 8 kps 157.1 orig-kb 80]
> SUCCESS chunker borg /Public 20060617 1 [sec 0.053 kb 8 kps 745.3]
> SUCCESS taper borg /Public 20060617 1 [sec 0.008 kb 64 kps 7702.5 {wr:
> writers
> 2 rdwait 0.000 wrwait 0.000 filemark 0.000}]
> INFO taper tape Dailys-6 kb 22912 fm 3 [OK]
> FINISH driver date 20060617 time 38.231
>
> ********************
>
> It looks to me as though it is not attempting to span the vtapes. Can
> someone
> please point me at the likely cause? I did have spanning working at one
> time, so I must have inadvertently changed something vital.
>
You could check how your settings are for each DLE individually and make
sure they seem reasonable (what you expect). For example:
amadmin Dailys disklist borg /home
amadmin Dailys disklist borg /home/anne/Photos
--
Jon H. LaBadie jon AT jgcomp DOT com
JG Computing
4455 Province Line Road (609) 252-0159
Princeton, NJ 08540-4322 (609) 683-7220 (fax)
|
|
|
