uname -a "Linux hostname 2.4.25 #3 SMP Wed May 5 18:14:59 PDT 2004 i686
GNU/Linux"
amanda 2.4.4p3-2
Oct 19 12:04:59 hostname kernel: Vendor: EXABYTE Model: VXA 1x10
1U Rev: A105
Oct 19 12:04:59 hostname kernel: Type: Medium
Changer ANSI SCSI revision: 04
Oct 19 12:04:59 hostname kernel: Vendor: EXABYTE Model:
VXA-2 Rev: 2104
Oct 19 12:04:59 hostname kernel: Type:
Sequential-Access ANSI SCSI revision: 02
Oct 19 12:04:59 hostname kernel: st: Version 20040102, bufsize 32768,
max init. bufs 4, s/g segs 16
Oct 19 12:04:59 hostname kernel: Attached scsi generic sg0 at scsi0,
channel 0, id 0, lun 0, type 8
Oct 19 12:04:59 hostname kernel: Attached scsi tape st0 at scsi0,
channel 0, id 1, lun 0
Oct 19 12:05:04 hostname kernel: st0: Block limits 1 - 245760 bytes.
Oct 19 12:05:04 hostname kernel: st0: Mode 0 options: buffer writes: 1,
async writes: 1, read ahead: 1
Oct 19 12:05:04 hostname kernel: st0: can bsr: 0, two FMs: 0, fast
mteom: 0, auto lock: 0,
Oct 19 12:05:04 hostname kernel: st0: defs for wr: 0, no block
limits: 0, partitions: 0, s2 log: 0
Oct 19 12:05:04 hostname kernel: st0: sysv: 0 nowait: 0
Oct 19 12:05:04 hostname kernel: st0: Default block size set to 0 bytes.
Oct 19 12:39:51 hostname kernel: scsi: device set offline - command
error recover failed: host 0 channel 0 id 1 lun 0
Oct 19 12:39:51 hostname kernel: st0: Error 6000000 (sugg. bt 0x0,
driver bt 0x6, host bt 0x0).
Oct 19 12:41:47 hostname kernel: scsi: device set offline - command
error recover failed: host 0 channel 0 id 0 lun 0
Why does this leave the tape drive in a state where amtape can no longer
see the first slot? mt -f /dev/nst0 status returns /dev/nst0: No such
file or directory... what is going on here?
Thanks!
--
Brad Willson
Sr. Computer Specialist
UW GeneTests, http://www.genetests.org
EM: bwil150n AT u.washington DOT edu
W: 206.221.4674, C: 425.891.2732
|
