On Tue, 4 Nov 2003 at 9:13am, Stephen Lawrence wrote

> Hello, I am trying to get amanda/mtx working with my Overland LibraryPro 
> ATI-2 tape library on Redhat 9.0. It has 19 slots, but only 2 slots are 
> showing up. Is there something else I need to do in /proc or something 
> to enable the rest of the slots?
> 
> # mtx -f /dev/sg1 status
>   Storage Changer /dev/sg1:1 Drives, 2 Slots ( 1 Import/Export )
> Data Transfer Element 0:Full (Storage Element 1 Loaded):VolumeTag = BLA549
>       Storage Element 1:Empty
>       Storage Element 2 IMPORT/EXPORT:Empty

What version of mtx?  Also, check the loader's firmware settings.  You can 
set the number of available slots in there -- it may be limited to 1 + the 
mail slot.

-- 
Joshua Baker-LePain
Department of Biomedical Engineering
Duke University