I've been running amanda 2.4.1p1 under Irix 6.5.x for several years now
with no problems. I recently upgraded to 2.4.3. Since then It's been
dumping core on me (in /tmp, which fills / unfortunately, so I don't get a
complete core). I see the AMANDA_TMPDIR and AMANDA_DBGDIR listed, but I
don't see anywhere to change those in amanda.conf. If someone else has
compiled amanda in this environment and run into this, I'd appreciate a
clue.
It appears to run fine until it runs out of tape (for some reason, it's
running out of tape on a DLT7000 dumping to 'tapedev
"/dev/rmt/tps2d7nrnsv.7000c"' (no rewind, non byte swapped, variable
block, DLT 7000, hardware compress) at around 30GB. And then it dumps
core. 2.4.1p1 got variable lengths out of that same device, with the
average being about 50GB, but when it ran out (rare occurance), it would
spool remaining dumps to holding disk and exit gracefully.
11:28am dragon /home/jamie %amadmin wdc version
build: VERSION="Amanda-2.4.3"
BUILT_DATE="Mon Feb 24 12:09:45 EST 2003"
BUILT_MACH="IRIX64 wraith 6.5 10151453 IP35" CC="cc"
CONFIGURE_COMMAND="'./configure' '--prefix=/usr/local/amanda-2.4.3'
'--with-index-server=dragon' '--with-rundump' '--without-amandahosts'
'--with-user=amanda' '--with-group=sys'"
paths: bindir="/usr/local/amanda-2.4.3/bin"
sbindir="/usr/local/amanda-2.4.3/sbin"
libexecdir="/usr/local/amanda-2.4.3/libexec"
mandir="/usr/local/amanda-2.4.3/man"
AMANDA_TMPDIR="/tmp/amanda" AMANDA_DBGDIR="/tmp/amanda"
CONFIG_DIR="/usr/local/amanda-2.4.3/etc/amanda"
DEV_PREFIX="/dev/dsk/" RDEV_PREFIX="/dev/rdsk/"
DUMP="/sbin/dump" RESTORE="/sbin/restore"
XFSDUMP="/sbin/xfsdump" XFSRESTORE="/sbin/xfsrestore"
SAMBA_CLIENT="/usr/local/bin/smbclient"
GNUTAR="/usr/local/bin/gtar"
COMPRESS_PATH="/usr/local/bin/gzip"
UNCOMPRESS_PATH="/usr/local/bin/gzip"
MAILER="/usr/sbin/Mail"
listed_incr_dir="/usr/local/amanda-2.4.3/var/amanda/gnutar-lists"
defs: DEFAULT_SERVER="dragon" DEFAULT_CONFIG="DailySet1"
DEFAULT_TAPE_SERVER="dragon"
DEFAULT_TAPE_DEVICE="/dev/null" HAVE_SYSVSHM
LOCKING=POSIX_FCNTL SETPGRP_VOID DEBUG_CODE
AMANDA_DEBUG_DAYS=4 BSD_SECURITY USE_RUNDUMP
CLIENT_LOGIN="amanda" FORCE_USERID HAVE_GZIP
COMPRESS_SUFFIX=".gz" COMPRESS_FAST_OPT="--fast"
COMPRESS_BEST_OPT="--best" UNCOMPRESS_OPT="-dc"
11:31am dragon /home/jamie %uname -aR
IRIX64 dragon 6.5 6.5.18m 10151453 IP27
11:31am dragon /home/jamie %cc -version
MIPSpro Compilers: Version 7.4
11:31am dragon /home/jamie %cat /etc/compiler.defaults
-DEFAULT:abi=n32:isa=mips3:proc=r4k
I set cc to compile for n32, mips3, R4000 as the client runs on Indys,
Indigo2s, and O2s as well as R10000/12000/14000 64bit clean systems (The
build host (wraith) is the exact same version of Irix and MIPSpro with the
same compiler.defaults).
I still have 2.4.1p1 on the system in /usr/local/amanda-2.4.1p1, and I can
revert, but I'd rather use a more current version. I like some of the
newer options (auto flush is nice), and would like to keep using them.
Jamie Bowden
--
"It was half way to Rivendell when the drugs began to take hold"
Hunter S Tolkien "Fear and Loathing in Barad Dur"
Iain Bowen <alaric AT alaric.org DOT uk>
|
