On Fri, 2003-01-31 at 13:34, Amro Radwan wrote:
> All,
> I'm trying to configure Amanda to use my tape library robot. The
> Exabyte 210, has the robot arm and 2 drive devices. In my
> "chg-scsi.conf" I'm not sure what to use for as my "changerdev".
It depends on your OS. In Linux, it will probably be a SCSI-generic
device, such as /dev/sg0. In *BSD it might be /dev/ch0. Check your
dmesg output for the SCSI devices probed at boot time.
Eric
|