ADSM-L

Re: [ADSM-L] TSM Server on CentOS Linux

2017-02-15 16:39:03
Subject: Re: [ADSM-L] TSM Server on CentOS Linux
From: ".Maurizio TERUZZI" <maurizio.teruzzi AT BLUEWIN DOT CH>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Wed, 15 Feb 2017 22:38:43 +0100
Hello "both" :)

It was the compat lib the problem.
tks to send me the log location.

Now the server is UP and importing some production data form v6 (en old V5) TSM Servers.


Thanks and good weekend.


Grazie
Maurizio



Il 15.02.2017 09:30, Sasa Drnjevic ha scritto:
On 14.2.2017. 16:52, .Maurizio TERUZZI wrote:
Hello Sasa,

I still have the same error.

I put the Kernal parameters in sysctl.conf file directly.

Hi Maurizio.

It wasn't me sending you the quick and dirty howto :-)

It was from dennis.schneck AT SCHULERGROUP DOT COM

I have only sent you a hint for the /etc/hosts file


OK, some other hints follow...Did you disable SELinux?

Hints:

-----
To determine if SELinux is installed and in enforcing mode, perform one
of the following tasks:

     Check the /etc/sysconfig/selinux file.
     Run the "sestatus" operating system command.
     Check the /var/log/messages file for SELinux notices.

To disable SELinux, complete one of the following tasks:
     Set permissive mode by issuing the "setenforce 0" command as a
superuser.

     Modify the /etc/sysconfig/selinux file and reboot the machine.
-----


And also examine the cfg wizard logs here...

# ls -la /var/tivoli/tsm/

drwxrwxr-x 2 root root    4096 Dec 21  2015 .
drwxrwxr-x 3 root root    4096 Dec 21  2015 ..
-rw-rw-r-- 1 root root   69564 Dec 21  2015 dsmicfgx.trc
-rw-rw-r-- 1 root root     578 Dec 21  2015 rxa_message.log
-rw-rw-r-- 1 root root 1704037 Dec 21  2015 rxa_trace.log


Regards,

--
Sasa Drnjevic
www.srce.unizg.hr























All required packages are installed, I re-run you commands to be sure.

Here the host content:
cat /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4
localhost4.localdomain4
::1         localhost localhost.localdomain localhost6
localhost6.localdomain6
10.16.23.101 tsmtest tsmtest1.bluewin.lan

User&Grp
grep -i tsm /etc/group
tsmsrv:x:1001:
id tsminst1
uid=1001(tsminst1) gid=1001(tsmsrv) groups=1001(tsmsrv)

TSM Directory structure:
ls -lRa /tsm
/tsm:
total 0
drwxr-xr-x. 1 tsminst1 tsmsrv  36 Jan 31 14:26 .
dr-xr-xr-x. 1 root     root   200 Feb 14 11:42 ..
drwxr-xr-x. 1 tsminst1 tsmsrv   0 Jan 28 19:50 archlog
drwxr-xr-x. 1 tsminst1 tsmsrv 184 Feb  3 14:51 bin
drwxr-xr-x. 1 tsminst1 tsmsrv   0 Jan 28 19:50 db
drwxr-xr-x. 1 tsminst1 tsmsrv   0 Jan 28 19:50 log
drwxr-xr-x. 1 tsminst1 tsmsrv   0 Jan 28 19:50 stg

/tsm/archlog:
total 0
drwxr-xr-x. 1 tsminst1 tsmsrv  0 Jan 28 19:50 .
drwxr-xr-x. 1 tsminst1 tsmsrv 36 Jan 31 14:26 ..

/tsm/bin:
total 5239532
drwxr-xr-x. 1 tsminst1 tsmsrv        184 Feb  3 14:51 .
drwxr-xr-x. 1 tsminst1 tsmsrv         36 Jan 31 14:26 ..
drwxr-xr-x. 1 tsminst1 tsmsrv        104 Feb  3 14:37 .input
-rwxrwxr-x. 1 tsminst1 tsmsrv 2664623713 Jan 31 01:16
SP_8.1_LIN86_SER_STG_ML.bin

/tsm/bin/.input:
total 16
drwxr-xr-x. 1 tsminst1 tsmsrv  104 Feb  3 14:37 .
drwxr-xr-x. 1 tsminst1 tsmsrv  184 Feb  3 14:51 ..
-rw-r--r--  1 root     root   2115 Nov 21 21:34 installnew32.xml
-rw-r--r--  1 root     root   2115 Nov 21 21:34 installnew64.xml
-rw-r--r--  1 root     root   5646 Nov 21 21:34 install_response.xml

/tsm/db:
total 0
drwxr-xr-x. 1 tsminst1 tsmsrv  0 Jan 28 19:50 .
drwxr-xr-x. 1 tsminst1 tsmsrv 36 Jan 31 14:26 ..

/tsm/log:
total 0
drwxr-xr-x. 1 tsminst1 tsmsrv  0 Jan 28 19:50 .
drwxr-xr-x. 1 tsminst1 tsmsrv 36 Jan 31 14:26 ..

/tsm/stg:
total 0
drwxr-xr-x. 1 tsminst1 tsmsrv  0 Jan 28 19:50 .
drwxr-xr-x. 1 tsminst1 tsmsrv 36 Jan 31 14:26 ..


(I don't have too much place on disks, I will  look for partitions on
future production server.


I miss the compat library... I didn't see on the documentation but it's
the same problem that in V6 (yes, I still in V6.x).
Since 1h at preparing the new instance... lets wait.


Thank for your the help.

Maurizio


--
Cordiali saluti / Meilleures salutations
Maurizio Teruzzi

https://www.linkedin.com/in/teruzzi

Join my computation group for social aid.
https://join.worldcommunitygrid.org?recruiterId=184105&teamId=K85XNJBR9N1

I- Pensate al impatto ambientale prima di stampare questa email
F- Pensez à l'environnement avant d'imprimer cet email
E- Please consider your environmental concern before printing this email

<Prev in Thread] Current Thread [Next in Thread>