As an option you can use the search=bulk, and the troublesome tape once
checked into the library can be updated with upd v XXXX access=unav
But your are correct Jeanne, the search=yes should have picked them up
since you "inserted them" into the library.

Hope that helps.


On Tue, Dec 23, 2014 at 10:36 AM, Jeanne Bruno <JBruno AT cenhud DOT com> wrote:

> Hello.   The library.
>
> I put tape on the door (the i/o hopper...ours holds 6 tapes) of the
> DS3512, closed the hopper, then using the little gui on the DS3512, I
> choose the library I want them checked into.  Then I hit 'insert media',
> picked the tape from the list and hit ok.  (heard the arm grab the tape and
> put somewhere in the library).
> Came back to the admin server and typed my checked in command.
>
>
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf 
> Of
> Steven Langdale
> Sent: Tuesday, December 23, 2014 12:02 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] checkin libv command
>
> Where are these tapes you want to label?  In the library or in the I/O
> hopper?
>
> On Tue, 23 Dec 2014 16:38 Jeanne Bruno <JBruno AT cenhud DOT com> wrote:
>
> > Hello.  hhmmm.  I tried status=private.  Results were the same.
> >
> > I tried:
> > label libv xxxxxx search=yes checkin=scratch labels=b
> > volr=A00560L5,A00561L5
> > same results.
> >
> > Also, the maxscr on all our copy pools are fine. (difference of
> > allowed and used is plenty)
> >
> > I have tried status=bulk in the past, on a tape I had issues with
> > earlier in the year, but that tape is just sitting in the library and
> > no backup process has ever used it.  So I'm hesitant to use 'bulk'.
> >
> > -----Original Message-----
> > From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> > Of Huebner, Andy
> > Sent: Tuesday, December 23, 2014 10:37 AM
> > To: ADSM-L AT VM.MARIST DOT EDU
> > Subject: Re: [ADSM-L] checkin libv command
> >
> > Below is the command I use on my virtual L180 libraries which are SCSI
> > libraries.
> > I think the difference is the volume range.
> >
> > I do not know the library you have, but some libraries are partitioned
> > and you have to make sure the tapes are assigned to the correct
> partition.
> >
> > label libv vlibTSM_4 checkin=scr labelsource=barcode
> > volr=s40000,s49999 search=y
> >
> > Andy Huebner
> >
> > -----Original Message-----
> > From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> > Of Jeanne Bruno
> > Sent: Tuesday, December 23, 2014 8:39 AM
> > To: ADSM-L AT VM.MARIST DOT EDU
> > Subject: [ADSM-L] checkin libv command
> >
> > Hello.  We are using TSM manager 6.3.3.0.
> > Tape Library is a DS3512.
> > I'm trying to check in some brand new tapes (LTO Ultrium 1.5TB).
> > On the DS3512, I choos the library and insert the tape into the machine.
> > On the command line I use this command:
> >
> > label libv xxxxxx search=yes checkin=scratch labels=b overwrite=y
> >
> > My output is this:
> >
> > ANR2017I Administrator ADMIN issued command: LABEL LIBVOLUME xxxx
> > search=yes checkin=scratch labels=b overwrite=y ANR0984I Process 120
> > for LABEL LIBVOLUME started in the BACKGROUND at 09:29:14.
> > ANR8799I LABEL LIBVOLUME: Operation for library XXXXXX started as
> > process 120.
> > ANR8801I LABEL LIBVOLUME process 120 for library XXXXXX completed; 0
> > volume(s) labeled, 0 volume(s) checked-in.
> > ANR0985I Process 120 for LABEL LIBVOLUME running in the BACKGROUND
> > completed with completion state SUCCESS at 09:29:19.
> >
> > 0 volumes, but finished successfully and when I query the library
> > XXXXXX, the new tape does not show in the list.
> >
> > I have also tried this command:
> > CHECKIN LIBVOLUME xxxxxx SEARCH=YES CHECKLABEL=YES status=scratch
> > WAITTIME=0 VOLLIST=A00xxxxL5.
> > Results are the same.
> >
> > I have also tried putting the tapes on the door of the machine and not
> > doing the 'insert media'...again results on the same.
> > We just received 30 new tapes last week and I've tried about 10 of
> > them so far.
> > I have used the cleaning tape and did the clean process and also
> > rebooted the DS3512.....same results afterwards.
> >
> > Any help, suggestions would be greatly appreciated.
> >
> >
> >
> > ____________________
> > Jeannie Bruno
> > Senior Systems Analyst
> > jbruno AT cenhud DOT com<mailto:jbruno AT cenhud DOT com>
> > Central Hudson Gas & Electric
> > (845) 486-5780
> >
>