ADSM-L

Re: [ADSM-L] TSM for VE: recommended VSwitch configuration?

2014-03-20 16:04:11
Subject: Re: [ADSM-L] TSM for VE: recommended VSwitch configuration?
From: Matthew McGeary <Matthew.McGeary AT POTASHCORP DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Thu, 20 Mar 2014 14:01:03 -0600
Sure thing:

1) The VMWare environment is connected via 8Gb fibre to an EMC VNX 5700
and uses mostly tiered storage pools (SSD-SAS),  The TSM server is
connected to a V7000 via fibre as well.  The TSM database is on SSD and
the storage pools are on 84 NL-SAS disks in a RAID6 extent pool provided
by the V7000.  The TSM server has a LACP nic team consisting of two 10 Gb
adapters.  Each ESXi host has either dual 1Gb NICs or dual 10Gb NICs
assigned to the management VKernel port.
2) The stated rates in my previous post are for IFIncremental traffic, be
it a fresh full or a subsequent CBT incremental backup.
3) The VMware client is 7.1 and the server version is 6.3.4.200.

Thanks!

Matthew McGeary
Technical Specialist
PotashCorp - Saskatoon
306.933.8921



From:   "Ryder, Michael S" <michael_s.ryder AT ROCHE DOT COM>
To:     ADSM-L AT VM.MARIST DOT EDU
Date:   03/20/2014 01:55 PM
Subject:        Re: [ADSM-L] TSM for VE: recommended VSwitch
configuration?
Sent by:        "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>



Hi Matthew

Can you tell us some more about your infrastructure?  What kind of disk
storage network are you using?  iSCSI?  FC?  block-data?  NAS?

Are your stated rates for image backups, or file-level incremental?

What version of TSM are you using?

Best regards,

Mike, x7942
RMD IT Client Services


On Thu, Mar 20, 2014 at 3:44 PM, Matthew McGeary <
Matthew.McGeary AT potashcorp DOT com> wrote:

> I've searched quite a bit and can't seem to find any guidelines on the
> following:
>
> 1) VMWare VSwitch configuration to maximize throughput for VM
> backups/restores
> 2) Expected throughput using 10Gb adapters
>
> We are in a situation at the moment where mass backups work quite well
and
> are very fast: as fast as the TSM server can handle.  However,
individual
> restores/backups are quite slow.  We've tested on a VMWare cluster with
> 1Gbps NICs attached to the management network and with 10Gbps attached
to
> the management network.  Both scenarios are quite a bit slower than I'd
> expect.  Average backup/restore transfer rates are in the 25 MB/s range
> using 1Gb NICs and around 55 MB/s using 10Gb NICs.
>
> How do I improve the throughput on these single-VM backup and restore
> sessions?
>
> Thanks!
>
> Matthew McGeary
> Technical Specialist
> PotashCorp - Saskatoon
> 306.933.8921
>