The MOVE DATA encountered a problem with either the tape, or the drive
itself. A couple things to try:
* Try marking DRIVE2 as offline (UPD DR <library> DRIVE2 ONL=N), and
then running the MOVE DATA again. This will force the operation to use a
different drive. If you get the same problem, then it points to a
problem with the tape, not the drive.
* Try running an audit on the tape (AUDIT VOL A00015L3 F=Y) and watch
the activity log for problems
* If you do have a bad tape, you can use your copy pool to restore it
with RESTORE VOLUME.
You might also check the logs on your library; some of them will give an
indication of whether the problem is media- or drive-related.
On 12/16/2013 03:09 AM, mik wrote:
> Hi everybody,
>
> I try to performe a move data
>
> move data A00015L3 stg=tapepool2 reconst=yes
>
> and it's work for this time but i have an error ANR8944E in the actlog
> ANR8944E Hardware or media error on drive DRIVE2 (\\.\Tape1) with volume
> A00015L3(OP=READ, Error Number= 23, CC=0, KEY=03, ASC=31, ASCQ=00,
> SENSE=F0.00.03.00.04.00.00.58.00.00.00.00.31.00.36.00.70.75.00.14,
> Description=An undetermined error has occurred). Refer to Appendix C in the
> 'Messages' manual for recommended action.
>
> i look q proc and the moved files is reduced i don't understand the move data
> continu..
>
> tsm: TSM_SERVER1>q proc
>
> Process Process Description Status
> Number
> -------- -------------------- ------------------------------------------------
> 1,608 Move Data Volume A00015L3 (storage pool TAPEPOOL), Target
> Pool TAPEPOOL2, Moved Files: 9603, Moved Bytes:
> 6,140,301,389, Unreadable Files: 0, Unreadable
> Bytes: 0. Current Physical File (bytes):
> 48,614,958 Current input volume: A00015L3.
> Current output volume: L:\BANDES\00004502.BFS.
>
> And after the error
>
> tsm: TSM_SERVER1>q proc
>
> Process Process Description Status
> Number
> -------- --------------------
> -------------------------------------------------
> 1,608 Move Data Volume A00015L3 (storage pool TAPEPOOL), Target
> Pool TAPEPOOL2, Moved Files: 6455, Moved Bytes:
> 4,299,012,246, Unreadable Files: 0, Unreadable
> Bytes: 0. Current Physical File (bytes):
> 26,237,247 Current input volume: A00015L3.
> Current output volume: L:\BANDES\00004502.BFS.
>
> Anyone have got the same probleme ?
>
> Thanks by advance.
>
> Regars, Mickael.
>
> +----------------------------------------------------------------------
> |This was sent by bobpatrick808182 AT yahoo DOT fr via Backup Central.
> |Forward SPAM to abuse AT backupcentral DOT com.
> +----------------------------------------------------------------------
--
-- Skylar Thompson (skylar2 AT u.washington DOT edu)
-- Genome Sciences Department, System Administrator
-- Foege Building S046, (206)-685-7354
|
