Re: [ADSM-L] issue with offsite reclamation
2012-12-05 08:29:33
I run "reclaim stg offsitecopy thre=60 du=600" to kick off the process.
Sometime I vary the duration or threshold but I still get this error every
time and I get it almost continuously:
ANR9999D Thread<32> issued message 9999 from:
ANR9999D Thread<32> 000007FEF7A56A99 OutDiagToCons()+159
ANR9999D Thread<32> 000007FEF7A504EC outDiagfExt()+fc
ANR9999D Thread<32> 000007FEF74D63DC AfRclmOnsiteVols()+20fc
ANR9999D Thread<32> 000007FEF74D6B5F AfRclmVolumeThread()+1bf
ANR9999D Thread<32> 000007FEF72782A4 startThread()+124
ANR9999D Thread<32> 0000000073211D9F endthreadex()+43
ANR9999D Thread<32> 0000000073211E3B endthreadex()+df
ANR9999D Thread<32> 0000000076D5652D BaseThreadInitThunk()+d
ANR9999D Thread<32> 0000000076E8C521 RtlUserThreadStart()+21
ANR9999D_1147918115 RclmOffsiteVols(afrclm.c:2975) Thread<32>: Error 3051
queuing
storage pool volumes for offsite reclamation. Offsite reclamation processing
may be
incomplete.
Out of about 175 offsite tapes I have about 30-40 below the 55% mark.
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
James Choate
Sent: Tuesday, December 04, 2012 10:35 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] issue with offsite reclamation
Hi David.
When you run reclamation on your offsite volumes, what is the command you run?
You also said you get a few tapes back, but that you get error.
What error message are you constantly getting?
And, last but not least, you mention that a lot of the offsite volumes have a
percent utilization of less than 25%.
I usually run the following query to show me what is reclaimable.
select volume_name,stgpool_name,pct_utilized,PCT_RECLAIM from volumes where
pct_reclaim>55
I usually reclaim tapes that have min of 55% - 60% reclaimable space.
~james
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Tyree, David
Sent: Tuesday, December 04, 2012 7:52 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: issue with offsite reclamation
Sorry might be a misunderstanding here.
I don't have an offsite server. I trying to do reclamation on offsite volumes
or trying too.
I get a few tapes back sometimes but I'm constantly getting that error message.
A lot of the offsite volumes have a percent utilization of less than 25% that
should be reclaiming.
David Tyree
Interface Analyst
South Georgia Medical Center
229.333.1155
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Arbogast, Warren K
Sent: Tuesday, December 04, 2012 9:34 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] issue with offsite reclamation
David,
If cartridges aren't coming back, you may need to run 'reconcile volumes' .
Don't combine 'reconcile volumes' of a virtual-volume based copypool on the
on-site server with reclamation of the primary target pool on the offsite
server.
tsm:> reconcile volumes <devcl> fix=yes
Keith Arbogast
Indiana University
|
|
|