ADSM-L
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[ADSM-L] Upgrading to 6.3: can I restore my 6.2.3 DB after installation

2012-05-04 16:57:49
Subject: [ADSM-L] Upgrading to 6.3: can I restore my 6.2.3 DB after installation
From: "Stackwick, Stephen" <sStackwick AT ICFI DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Fri, 4 May 2012 20:37:26 +0000 
Moving from W2K3 32bit to W2K8 64bit, so need to do a clean install of Windows 
(so I've been told). There's no possibiilty of new hardware so my plan is to 
back up TSM, wipe the system, install W2K8 64 bit, then install 64bit TSM 6.3.1.

I know (from previous posts) that the bit-ness of the DB is not a problem, but 
is it possible to restore the old 6.2.3 DB into my new 6.3.1 installation and 
carry on? I'd rather not have to install 6.2.3 first, restore, then upgrade but 
will if I have to...

Steve

STEPHEN STACKWICK | Senior Consultant | 301.518.6352 (m) | sstackwick AT icfi 
DOT com<mailto:sstackwick AT icfi DOT com> | icfi.com<http://www.icfi.com/>
ICF INTERNATIONAL | 410 E. Pratt Street Suite 2214, Baltimore, MD 21202 | 
410.539.1135 (o)
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [ADSM-L] Pct Migr=0.0, Caching=No but there is data in the disk stgpool, Zoltan Forray/AC/VCU
Next by Date:  Re: [ADSM-L] Upgrading to 6.3: can I restore my 6.2.3 DB after installation, Jo Lay
Previous by Thread:  [ADSM-L] Pct Migr=0.0, Caching=No but there is data in the disk stgpool, Zoltan Forray/AC/VCU
Next by Thread:  Re: [ADSM-L] Upgrading to 6.3: can I restore my 6.2.3 DB after installation, Jo Lay
Indexes:  [Date] [Thread] [Top] [All Lists]