Then Harold has the right answer.  If you can telnet from the tsm server to the 
client at the port the listener is suppose to be using, than it is not a 
firewall problem.  If the telnet attempt times out, either the cad (or 
scheduler) is not running, it is using a different port (see the cad startup 
messages in dsmwebcl.log), or there is a firewall/network issue blocking access.

David

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Hughes, Timothy
Sent: Wednesday, November 16, 2011 2:23 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run

Hi Wanda 

We use prompted mode

Thanks

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Prather, Wanda
Sent: Wednesday, November 16, 2011 11:55 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Windows 2008 client ..TSM schedule won't run

Are you running in polling (the default) or prompted mode?

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Hughes, Timothy
Sent: Wednesday, November 16, 2011 11:24 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] Windows 2008 client ..TSM schedule won't run

Hi,
We have 4 windows 2008 that are missing consistently the TSM scheduler is set 
to start however the backups don't run.
f.y.i - We had this issue about  5 months ago and the admin set the UAC to the 
lowest settings and turned the firewall off and the backups worked until 
recently. The admin says the firewall is turned off and the settings are the 
same.
Anyone else have or have had this issue?

Windows 2008 64 bit R2 servers
Tivoli clients 6.2.2.2

Thanks for any help/advice in advance!