Hi,
I have a special sitation herewhere I define the library and library path to
the TSM server. I also have the lto4 drives defined to the TSM server, but
then I have the drive paths defined to my 3 NAS datamovers. I have a similar
set up for my lto2 drives in a different type of library, so I pretty much just
did the same set up, but tried to do this with a scsi library (Quantum i6000)
and this is where I am right now.
The OS of the TSM server is AIX and the TSM version is 5.5.5.0.
I have 12 LTO4 tape drives defined:
Library Name: NAS_QI6000
Drive Name: LTO4_1
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
ACS DriveId:
Drive State: UNKNOWN
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): LIDZR8V
Last Update Date/Time: 03/30/11 10:22:04
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: NAS_QI6000
Drive Name: LTO4_11
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
ACS DriveId:
Drive State: UNKNOWN
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 09/26/11 16:00:21
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: NAS_QI6000
Drive Name: LTO4_24
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
ACS DriveId:
Drive State: UNKNOWN
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 09/26/11 15:57:16
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: NAS_QI6000
Drive Name: LTO4_25
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
ACS DriveId:
Drive State: UNKNOWN
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 09/26/11 15:59:33
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: NAS_QI6000
Drive Name: LTO4_26
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
ACS DriveId:
Drive State: UNKNOWN
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 09/26/11 16:00:37
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: NAS_QI6000
Drive Name: LTO4_27
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
ACS DriveId:
Drive State: UNKNOWN
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 09/26/11 15:57:36
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: NAS_QI6000
Drive Name: LTO4_28
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
ACS DriveId:
Drive State: UNKNOWN
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 09/26/11 15:59:49
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: NAS_QI6000
Drive Name: LTO4_29
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
ACS DriveId:
Drive State: UNKNOWN
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 09/26/11 16:00:51
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: NAS_QI6000
Drive Name: LTO4_30
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
ACS DriveId:
Drive State: UNKNOWN
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 09/26/11 15:58:01
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: NAS_QI6000
Drive Name: LTO4_31
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
ACS DriveId:
Drive State: UNKNOWN
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 09/26/11 16:00:06
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: NAS_QI6000
Drive Name: LTO4_32
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
ACS DriveId:
Drive State: UNKNOWN
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 09/26/11 16:01:00
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: NAS_QI6000
Drive Name: LTO4_6
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
ACS DriveId:
Drive State: UNKNOWN
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 09/26/11 15:59:15
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
As you can see they aren't showing the drive state yet, but I'm not sure if
that's normal or not as they haven't been used yet.
Here are the path definitions from the drives to the datamovers:
Source Name: VNX5481_SERVER_2_OFFSITE
Source Type: DATAMOVER
Destination Name: LTO4_1
Destination Type: DRIVE
Library: NAS_QI6000
Node Name:
Device: c96t0l0
External Manager:
LUN:
Initiator: 0
Directory:
On-Line: Yes
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 10/04/11 14:59:18
Source Name: VNX5481_SERVER_2_OFFSITE
Source Type: DATAMOVER
Destination Name: LTO4_24
Destination Type: DRIVE
Library: NAS_QI6000
Node Name:
Device: c80t0l0
External Manager:
LUN:
Initiator: 0
Directory:
On-Line: Yes
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 10/04/11 15:00:03
Source Name: VNX5481_SERVER_2_OFFSITE
Source Type: DATAMOVER
Destination Name: LTO4_27
Destination Type: DRIVE
Library: NAS_QI6000
Node Name:
Device: c64t0l0
External Manager:
LUN:
Initiator: 0
Directory:
On-Line: Yes
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 10/04/11 15:00:29
Source Name: VNX5481_SERVER_2_OFFSITE
Source Type: DATAMOVER
Destination Name: LTO4_30
Destination Type: DRIVE
Library: NAS_QI6000
Node Name:
Device: c48t0l0
External Manager:
LUN:
Initiator: 0
Directory:
On-Line: Yes
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 10/04/11 15:00:54
Source Name: VNX5481_SERVER_3_OFFSITE
Source Type: DATAMOVER
Destination Name: LTO4_25
Destination Type: DRIVE
Library: NAS_QI6000
Node Name:
Device: c80t0l0
External Manager:
LUN:
Initiator: 0
Directory:
On-Line: Yes
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 10/04/11 15:02:01
Source Name: VNX5481_SERVER_3_OFFSITE
Source Type: DATAMOVER
Destination Name: LTO4_28
Destination Type: DRIVE
Library: NAS_QI6000
Node Name:
Device: c64t0l0
External Manager:
LUN:
Initiator: 0
Directory:
On-Line: Yes
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 10/04/11 15:02:27
Source Name: VNX5481_SERVER_3_OFFSITE
Source Type: DATAMOVER
Destination Name: LTO4_31
Destination Type: DRIVE
Library: NAS_QI6000
Node Name:
Device: c48t0l0
External Manager:
LUN:
Initiator: 0
Directory:
On-Line: Yes
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 10/04/11 15:02:52
Source Name: VNX5481_SERVER_3_OFFSITE
Source Type: DATAMOVER
Destination Name: LTO4_6
Destination Type: DRIVE
Library: NAS_QI6000
Node Name:
Device: c96t0l0
External Manager:
LUN:
Initiator: 0
Directory:
On-Line: Yes
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 10/04/11 15:01:35
Source Name: VNX5481_SERVER_4_OFFSITE
Source Type: DATAMOVER
Destination Name: LTO4_11
Destination Type: DRIVE
Library: NAS_QI6000
Node Name:
Device: c96t0l0
External Manager:
LUN:
Initiator: 0
Directory:
On-Line: Yes
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 10/04/11 15:03:18
Source Name: VNX5481_SERVER_4_OFFSITE
Source Type: DATAMOVER
Destination Name: LTO4_26
Destination Type: DRIVE
Library: NAS_QI6000
Node Name:
Device: c80t0l0
External Manager:
LUN:
Initiator: 0
Directory:
On-Line: Yes
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 10/04/11 15:03:43
Source Name: VNX5481_SERVER_4_OFFSITE
Source Type: DATAMOVER
Destination Name: LTO4_29
Destination Type: DRIVE
Library: NAS_QI6000
Node Name:
Device: c64t0l0
External Manager:
LUN:
Initiator: 0
Directory:
On-Line: Yes
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 10/04/11 15:04:09
Source Name: VNX5481_SERVER_4_OFFSITE
Source Type: DATAMOVER
Destination Name: LTO4_32
Destination Type: DRIVE
Library: NAS_QI6000
Node Name:
Device: c48t0l0
External Manager:
LUN:
Initiator: 0
Directory:
On-Line: Yes
Last Update by (administrator): LIDGOYK
Last Update Date/Time: 10/04/11 15:04:34
Output of show slot command:
PVR slot information for library NAS_QI6000.
Library : NAS_QI6000
Product Id : Scalar i6000
Support module : 4
Mount count : 0
Drives : 5
Slots : 102
Changers : 1
Import/Exports : 36
Device : /dev/lb0
Drive 0, element 256
Drive 1, element 257
Drive 2, element 258
Drive 3, element 259
Drive 4, element 260
Changer 0, element 1
ImpExp 0, element number 16
ImpExp 1, element number 17
ImpExp 2, element number 18
ImpExp 3, element number 19
ImpExp 4, element number 20
ImpExp 5, element number 21
ImpExp 6, element number 22
ImpExp 7, element number 23
ImpExp 8, element number 24
ImpExp 9, element number 25
ImpExp 10, element number 26
ImpExp 11, element number 27
ImpExp 12, element number 28
ImpExp 13, element number 29
ImpExp 14, element number 30
ImpExp 15, element number 31
ImpExp 16, element number 32
ImpExp 17, element number 33
ImpExp 18, element number 34
ImpExp 19, element number 35
ImpExp 20, element number 36
ImpExp 21, element number 37
ImpExp 22, element number 38
ImpExp 23, element number 39
ImpExp 24, element number 40
ImpExp 25, element number 41
ImpExp 26, element number 42
ImpExp 27, element number 43
ImpExp 28, element number 44
ImpExp 29, element number 45
ImpExp 30, element number 46
ImpExp 31, element number 47
ImpExp 32, element number 48
ImpExp 33, element number 49
ImpExp 34, element number 50
ImpExp 35, element number 51
Slot 0, status Full, element number 4096, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 1, status Full, element number 4097, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 2, status Full, element number 4098, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 3, status Full, element number 4099, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 4, status Full, element number 4100, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 5, status Full, element number 4101, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 6, status Full, element number 4102, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 7, status Full, element number 4103, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 8, status Full, element number 4104, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 9, status Full, element number 4105, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 10, status Full, element number 4106, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 11, status Full, element number 4107, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 12, status Full, element number 4108, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 13, status Full, element number 4109, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 14, status Full, element number 4110, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 15, status Full, element number 4111, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 16, status Full, element number 4112, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 17, status Full, element number 4113, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 18, status Full, element number 4114, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
Slot 19, status Full, element number 4115, barcode present, barcode value ,
devT=ANY, mediaT=-1, elemT=ANY
slot element range 4096 - 4197
I'm not sure how I'd use the drive mapping utility since they aren't attached
to my TSM server... or is that still possible?
Sorry for all of the questions, but I've never used a scsi library before so
this is all new to me. I'm a little confused as we had more drives added to
this configuration, but it's only showing 5. Maybe I need to recycle the TSM
application to make it recognize the changes?
Thanks again for any suggestions/help!
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
James Choate
Sent: Wednesday, October 12, 2011 3:35 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Label volumes in a scsi library?
Joni,
It doesn't look like your drives/paths are defined correctly. The library is
trying to move the volume from a slot 4096 to slot-element 65535.
In my experience, when I see slot element 65535, it usually points to either
the drives, paths to drives not being defined correctly.
A couple of questions:
1) what's the OS?
2) what do your drives / paths to drives look like
3) what does the output of a show slot look like, at least for the drives
4) have you tried the IBM tape diagnostic tool to identify the correct
element numbers for your drives / mt mapping?
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Moyer, Joni M
Sent: Wednesday, October 12, 2011 11:57 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Label volumes in a scsi library?
Hi,
I've tried to do this and I'm now getting the following errors:
10/06/11 12:50:34 ANR0609I LABEL LIBVOLUME started as process 33588.
(SESSION: 58343, PROCESS: 33588)
10/06/11 12:50:46 ANR2017I Administrator LIDZR8V issued command: QUERY
PROCESS (SESSION: 58344)
10/06/11 12:50:47 ANR8300E I/O error on library NAS_QI6000 (OP=00006C03,
CC=207, KEY=05, ASC=21, ASCQ=01, SENSE=70.00.05.00.00.00-
.00.0A.00.00.00.00.21.01.00.CF.00.06., Description=Device
is not in a state capable of performing request). Refer
to Appendix C in the 'Messages' manual for recommended
action. (SESSION: 58343, PROCESS: 33588)
10/06/11 12:50:48 ANR8942E Could not move volume Q00000 from slot-element
4096 to slot-element 65535. (SESSION: 58343, PROCESS:
33588)
10/06/11 12:50:48 ANR8802E LABEL LIBVOLUME process 33588 for library
NAS_QI6000 failed. (SESSION: 58343, PROCESS: 33588)
10/06/11 12:50:48 ANR0985I Process 33588 for LABEL LIBVOLUME running in the
BACKGROUND completed with completion state FAILURE at
It seems like it doesn't want to move the volume to a drive to label it, but
I'm having issues trying to figure out what that error message means from
Appendix C.
How do I tell where those slot elements are? It appears as if something is
still not working correctly, but I'm trying to figure out if this is a set up
issue? Or if it's something else entirely.
I defined a scsi library as follows for my nas partition which the drives are
zoned from the library to the datamovers and I have the library & path and
drives & paths defined within TSM:
Library Name: NAS_QI6000
Library Type: SCSI
ACS Id:
Private Category:
Scratch Category:
WORM Scratch Category:
External Manager:
Shared: No
LanFree:
ObeyMountRetention:
Primary Library Manager:
WWN:
Serial Number: QUANTUM273100111_LL2
AutoLabel: No
Reset Drives: No
Relabel Scratch:
Source Name: TSMPROD3
Source Type: SERVER
Destination Name: NAS_QI6000
Destination Type: LIBRARY
Library:
Node Name:
Device: /dev/lb0
External Manager:
LUN:
Initiator: 0
Directory:
On-Line: Yes
If anyone has any suggestions/ideas as to what I might be doing wrong I'd
really appreciate the help. Thanks!!!!
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
James Choate
Sent: Friday, October 07, 2011 9:53 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Label volumes in a scsi library?
How did tape Q00000 get into the library? Did you manually load a batch of
tapes in this library without checking them in thru the bulk I/O?
If that is the case, you can just checkin the tapes.
You can try:
Check in volumes that are already labeled:
checkin libvolume NAS_QI6000 search=yes status=scratch checklabel=barcode
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Moyer, Joni M
Sent: Thursday, October 06, 2011 8:52 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] Label volumes in a scsi library?
Hi Everyone,
I was trying to label a volume in a scsi library and I used the label libvol
command to try and label Q00000 in the library NAS_QI6000 and it is failing.
The tape is already physically in a slot in the library, so could someone
please explain how I am to label tapes within this library on TSM?
Any help is greatly appreciated!!!!
Date/Time Message
-------------------- ----------------------------------------------------------
10/06/11 10:24:59 ANR0984I Process 33581 for LABEL LIBVOLUME started in the
BACKGROUND at 10:24:59. (SESSION: 58024, PROCESS: 33581)
10/06/11 10:24:59 ANR8799I LABEL LIBVOLUME: Operation for library NAS_QI6000
started as process 33581. (SESSION: 58024, PROCESS:
33581)
10/06/11 10:24:59 ANR0609I LABEL LIBVOLUME started as process 33581.
(SESSION: 58024, PROCESS: 33581)
10/06/11 10:25:10 ANR8323I 006: Insert ANY volume Q00000 R/W into entry/exit
port of library NAS_QI6000 within 60 minute(s); issue
'REPLY' along with the request ID when ready. (SESSION:
58024, PROCESS: 33581)
10/06/11 10:26:45 ANR2017I Administrator LIDZR8V issued command: QUERY
ACTLOG search="process: 33581" (SESSION: 58028)
10/06/11 10:32:21 ANR2017I Administrator LIDZR8V issued command: QUERY
ACTLOG search="process: 33581" (SESSION: 58031)
10/06/11 10:32:30 ANR8385E All entry/exit ports of library NAS_QI6000 are
empty. (SESSION: 58024, PROCESS: 33581)
10/06/11 10:32:30 ANR8802E LABEL LIBVOLUME process 33581 for library
NAS_QI6000 failed. (SESSION: 58024, PROCESS: 33581)
10/06/11 10:32:30 ANR0985I Process 33581 for LABEL LIBVOLUME running in the
BACKGROUND completed with completion state FAILURE at
10:32:30. (SESSION: 58024, PROCESS: 33581)
________________________________
This e-mail and any attachments to it are confidential and are intended solely
for use of the individual or entity to whom they are addressed. If you have
received this e-mail in error, please notify the sender immediately and then
delete it. If you are not the intended recipient, you must not keep, use,
disclose, copy or distribute this e-mail without the author's prior permission.
The views expressed in this e-mail message do not necessarily represent the
views of Highmark Inc., its subsidiaries, or affiliates.
|