Hi
Thank for all the answers on my problem installing the Tivoli server 6.2.0
instance. I succeded install it by hand (manual)(the commandline is your
friend), without using the different gui'es and in fact all the installing was
finish, so all I had to do was installing the service.
I have a server running the same setup, but it started as 6.1 server, perhaps
it didn't have the timeout problems
But im running that's the bottom line
Med venlig hilsen / Best regards
Leif Torstensen
Backup Technician
lvt AT athena DOT dk
www.athena.dk
Athena IT-Group
Fyn
Munkerisvej 1
DK-5230 Odense M
Tlf.: +45 70 25 30 30
Fax: +45 66 13 93 85
-----Oprindelig meddelelse-----
Fra: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] På vegne af
Carol Trible
Sendt: 23. maj 2011 22:19
Til: ADSM-L AT VM.MARIST DOT EDU
Emne: Re: [ADSM-L] Problem installing TSM server Instance 6.2
Hello Leif,
The problem you are seeing in the wizard is that it timed out waiting for
the format to complete. . It looks like it took over an hour to run the
formatting commands, and this generally indicates some problems with your
setup, something that will also impact your sever performance once it is
running. Please check to make sure your system memory and storage
requirements, and , the location of your server directories, and insure
they all meet the recommendations in the install manual. You might also
try moving your directories to another disk, I have seen a similar problem
where there were disk performance issues.
See http://www.ibm.com/support/docview.wss?uid=swg21434168 for information on
the 499 RC.
Carol Trible
IBM Tivoli Storage Manager Development
"ADSM: Dist Stor Manager" <ADSM-L AT vm.marist DOT edu> wrote on 05/12/2011
10:23:18 PM:
> [image removed]
>
> [ADSM-L] Problem installing TSM server Instance 6.2
>
> Leif Torstensen
>
> to:
>
> ADSM-L
>
> 05/12/2011 10:29 PM
>
> Sent by:
>
> "ADSM: Dist Stor Manager" <ADSM-L AT vm.marist DOT edu>
>
> Please respond to "ADSM: Dist Stor Manager"
>
> Hi
>
> I try to install new TSM server 6.2 on a windows 3003 64bit, but I
> allways stops at with following in the log view :
>
> ANR2976I Offline DB backup for database TSMDB1 started.
>
> Format completed with return code 499
>
> And the dsmicfgx.trc shows:
>
> Thu May 12 14:02:27 CEST 2011
> com.tivoli.dsm.ServerConfig.ServerDB.doDb2Set(): enter, Setting
> DB2CODEPAGE=819
> Thu May 12 14:02:27 CEST 2011
> com.tivoli.dsm.ServerConfig.ServerDB.doDb2Set(): Issuing cmd: "C:
> \Program Files\Tivoli\TSM\db2\bin\db2set" -i Server1 DB2CODEPAGE=819
> 2>&1 Thu May 12 14:02:27 CEST 2011
> com.tivoli.dsm.ServerConfig.ServerDB.doDb2Set(): exit, rc 0 Thu May 12
> 14:02:27 CEST 2011
> com.tivoli.dsm.ServerConfig.ServerDB.getShortPath(): enter,
> resolving: C:\Program Files\Tivoli\TSM\server1 Thu May 12 14:02:27
> CEST 2011
> com.tivoli.dsm.ServerConfig.ServerDB.getShortPath(): exit, result:
> C:\PROGRA~1\Tivoli\TSM\server1
> Thu May 12 14:02:27 CEST 2011
> com.tivoli.dsm.ServerConfig.ServerDB.doDb2Set(): enter, Setting
> DB2_VENDOR_INI="C:\PROGRA~1\Tivoli\TSM\server1\tsmdbmgr.env"
> Thu May 12 14:02:27 CEST 2011
> com.tivoli.dsm.ServerConfig.ServerDB.doDb2Set(): Issuing cmd: "C:
> \Program Files\Tivoli\TSM\db2\bin\db2set" -i Server1
> DB2_VENDOR_INI="C:\PROGRA~1\Tivoli\TSM\server1\tsmdbmgr.env" 2>&1 Thu
> May 12 14:02:28 CEST 2011
> com.tivoli.dsm.ServerConfig.ServerDB.doDb2Set(): exit, rc 0 Thu May 12
> 14:02:28 CEST 2011
> com.tivoli.dsm.ServerConfig.ServerDB.createDb2Instance(): exit, rc 301
> Thu May 12 14:02:28 CEST 2011
> com.tivoli.dsm.ConfigWizard.DoFormatPanel.signalEvent(): enter,
> event=createInstanceDone, rc=301 Thu May 12 14:02:28 CEST 2011
> com.tivoli.dsm.ServerConfig.ServerDB
> $FormatThread.run(): Starting remote session for format Thu May 12
> 14:02:28 CEST 2011 com.tivoli.dsm.ServerConfig.ServerDB
> $FormatThread.run(): Starting remote session for monitor Thu May 12
> 14:02:28 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.Constructor(): enter Thu
> May 12 14:02:28 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.Constructor(): exit Thu May
> 12 14:02:28 CEST 2011 com.tivoli.dsm.ServerConfig.ServerDB
> $FormatThread.run(): Issuing cmd: "C:\Program Files\Tivoli\TSM
> \Server\dsmserv" -k Server1 FORMAT dbfile=\"C:\Program Files\Tivoli
> \TSM\server1\dbfile.1\" activelogdir=\"C:\TSMACTLOG\log\"
> archlogdir=\"C:\SEQDISK\SAT705\Archivelog\primary\" mirrorlogdir=
> \"C:\TSMACTLOG\mirror\" archfailoverlogdir=\"C:\SEQDISK\SAT705
> \Archivelog\secondary\" activelogsize=16384 >Format.Out 2>&1 Thu May
> 12 14:02:28 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.run(): enter, Monitoring
> file C:\Program Files\Tivoli\TSM\server1\Format.Out
> Thu May 12 14:02:28 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): Could not open file
> C:\Program Files\Tivoli\TSM\server1\Format.Out
> Thu May 12 14:05:20 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): enter Thu May 12
> 14:05:20 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): exit Thu May 12
> 14:10:30 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): enter Thu May 12
> 14:10:30 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): exit Thu May 12
> 14:15:40 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): enter Thu May 12
> 14:15:40 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): exit Thu May 12
> 14:20:50 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): enter Thu May 12
> 14:20:50 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): exit Thu May 12
> 14:26:00 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): enter Thu May 12
> 14:26:00 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): exit Thu May 12
> 14:31:10 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): enter Thu May 12
> 14:31:10 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): exit Thu May 12
> 14:36:20 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): enter Thu May 12
> 14:36:20 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): exit Thu May 12
> 14:41:30 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): enter Thu May 12
> 14:41:30 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): exit Thu May 12
> 14:46:40 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): enter Thu May 12
> 14:46:40 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): exit Thu May 12
> 14:51:50 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): enter Thu May 12
> 14:51:50 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): exit Thu May 12
> 14:57:00 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): enter Thu May 12
> 14:57:00 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): exit Thu May 12
> 15:02:10 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): enter Thu May 12
> 15:02:10 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.read(): exit Thu May 12
> 15:02:28 CEST 2011 com.tivoli.dsm.ServerConfig.ServerDB
> $FormatThread.run(): Format rc: -1
> Thu May 12 15:02:28 CEST 2011 com.tivoli.dsm.ServerConfig.ServerDB
> $FormatThread.run(): format stderr:
> Thu May 12 15:02:28 CEST 2011 com.tivoli.dsm.ServerConfig.ServerDB
> $FormatThread.run(): FFDC
> java.io.FileNotFoundException: CTGRI0009E C:\Program Files\Tivoli
> \TSM\server1\dbfile.1 cannot be removed.
> at
> com.ibm.tivoli.remoteaccess.LocalWindowsProtocol.rm
> (LocalWindowsProtocol.java:2556)
> at com.tivoli.dsm.ServerConfig.ServerDB
> $FormatThread.run(ServerDB.java:4654)
> Thu May 12 15:02:28 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.cancel(): enter Thu May 12
> 15:02:30 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.run(): Ending remote
> session for monitor Thu May 12 15:02:30 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.run(): exit Thu May 12
> 15:02:31 CEST 2011
> com.tivoli.dsm.ServerConfig.ProcessMonitor.cancel(): exit Thu May 12
> 15:02:31 CEST 2011
> com.tivoli.dsm.ConfigWizard.DoFormatPanel.signalEvent(): enter,
> event=formatDone, rc=499 Thu May 12 15:02:31 CEST 2011
> com.tivoli.dsm.ServerConfig.ServerDB
> $FormatThread.run(): Ending remote session for format Thu May 12
> 15:02:31 CEST 2011 com.tivoli.dsm.ServerConfig.ServerDB
> $FormatThread.run(): exit
> Thu May 12 15:59:11 CEST 2011
> com.tivoli.dsm.ConfigWizard.DoFormatPanel.okToContinue(): enter Thu
> May 12 15:59:11 CEST 2011
> com.tivoli.dsm.ConfigWizard.DoFormatPanel.okToContinue(): exit
>
> But looking in the format.out shows:
>
> NR0900I Processing options file C:\Program Files\Tivoli\TSM\server1
\dsmserv.-
> opt.
> ANR7800I DSMSERV generated at 16:40:37 on Mar 5 2010.
>
> Tivoli Storage Manager for Windows
> Version 6, Release 2, Level 0.0
>
> Licensed Materials - Property of IBM
>
> (C) Copyright IBM Corporation 1990, 2010.
> All rights reserved.
> U.S. Government Users Restricted Rights - Use, duplication or
> disclosure restricted by GSA ADP Schedule Contract with IBM Corporation.
>
> ANR4726I The ICC support module has been loaded.
> ANR0152I Database manager successfully started.
> ANR1380I The buffer pool monitor switch is enabled.
> ANR0992I Server's database formatting complete.
> ANR0369I Stopping the database manager because of a server shutdown.
> ANR2976I Offline DB backup for database TSMDB1 started.
> ANR2974I Offline DB backup for database TSMDB1 completed successfully.
>
> I looks like I have a process hanging. I have check for the
> administrator to be in the db2users and db2admns group and the
> administrator have rights to the the database
>
> C:\Program Files\Tivoli\TSM\db2\BIN>db2 "select
> grantee,securityadmauth from sys cat.dbauth"
>
> GRANTEE
> SECURITYADMAUTH
>
--------------------------------------------------------------------------------
> ------------------------------------------------ ---------------
> ADMINISTRATOR
> Y
>
> Anybody have the holy word to get the TSM instance up running. I both
> tried to run on tsm server 6.2 and on 6.2.2.30 but allways same
result
>
>
>
>
> Med venlig hilsen / Best regards
>
>
> Leif Torstensen
> Athena
|