Re: [ADSM-L] Configuring tape library on centOS
2010-07-07 15:48:53
Hi Xav,
It´s not. CentOS is not....but as it´s RH Enterprise based, usually works
great,
both as TSM Server and Client.
I am trying to install the lin-tape driver...but there are a zillion versions
at
the FTP site and I am not sure which one to use....
This is what uname -a shows:
Linux tsmserver 2.6.18-164.el5 #1 SMP Thu Sep 3 03:33:56 EDT 2009 i686 i686
i386
GNU/Linux
Any ideas?
Mario
________________________________
From: Xav Paice <xpaice AT OSS.CO DOT NZ>
To: ADSM-L AT VM.MARIST DOT EDU
Sent: Wed, July 7, 2010 3:38:40 AM
Subject: Re: Configuring tape library on centOS
----- "Mario Behring" <mariobehring AT YAHOO DOT COM> wrote:
>
> Hi list,
>
> I have installed a TSM 5.5 server on a CentOS 5.4 server and I am
> having a hard
> time configuring the Tape Library using the TSM Device Driver
> (tsmscsi)...despite having done this a thousand times...
>
> This is what the /proc/scsi/scsi brings:
> > Vendor: IBM Model: ULT3582-TL Rev: 310B
> > Type: Medium Changer ANSI SCSI revision: 02
>
Since you're using an IBM library with LTO-2 drives - go to
ftp://ftp.software.ibm.com/storage/devdrvr/Linux/ and use the IBM tape drivers
rather than the TSM device driver.
See http://www-01.ibm.com/support/docview.wss?rs=663&uid=swg21082581 as well.
I didn't realise CentOS was on the supported list :)
|
|
|