Hi,
I had the same problem. Try define everything without any sn or wwn numbers, in
this direction:
Define library
Define drive
....
Define path (to library)
Define path (drive)
...
Regards,
Jakub
--
Jakub Głębicki
Senior IT Administrator
Bank DnB NORD Polska S.A.
_____________________________________
ul. Postępu 15C, 02-676 Warszawa
tel. 022 524 1618, fax. 022 524 1001
http://www.dnbnord.pl/
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
TSM User
Sent: Wednesday, May 05, 2010 7:24 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] TSM 6.2 DB restore not working
I'm trying to restore a database backup to a new server. It's 6.2 on Windows
2008 64-bit, with an HP library and LTO3 drives. I cannot get the library to
see the TSM device driver, and it shows up as Unknown Medium Changer. I tried
deleting the devices and installing the driver, but it came back the same way.
Any attempts to install it just return a message that it's at the most current
level.
Thing is, yesterday I was able to work around it. I was able to change
devconf.out to make the library a manual one, and it would mount tapes. I had
to do some other stuff that necessitated switching back to the old server and
taking a new database backup, and when we came back up on the new server, the
devconf.out was basically wiped, probably on reboot. Now, when I try to make
the library a manual one, I'm getting an error message that the device
parameter in the "define path" line is not valid for a 349x library. I have no
clue why it's trying to make it that kind of library.
I've tried a number of different configs, and I'm beating my head against a
wall at this point.
Original devconf.out (modified for privacy):
/* Device Configuration */
DEFINE DEVCLASS LT03 DEVTYPE=LTO FORMAT=DRIVE MOUNTLIMIT=DRIVES MOUNTWAIT=60
MOUNTRETENTION=60 PREFIX=ADSM LIBRARY=owner-LT03 WORM=NO DRIVEENCRYPTION=ALLOW
SET SERVERNAME name_SERVER1 SET SERVERPASSWORD
21461293e7e722dfc44b1113c588ad1240
DEFINE LIBRARY owner-LT03 LIBTYPE=SCSI WWN="xxxxxxxxxxxx4000"
SERIAL="xxxxxx000M" SHARED=NO AUTOLABEL=NO RESETDRIVE=NO DEFINE DRIVE
owner-LT03 TAPE0 ELEMENT=480 ONLINE=Yes WWN="xxxxxxxxxxxx4F22"
SERIAL="xxxxxx74J9"
DEFINE DRIVE owner-LT03 TAPE1 ELEMENT=481 ONLINE=Yes WWN="xxxxxxxxxxxx6812"
SERIAL="xxxxxx74F1"
/* LIBRARYINVENTORY bunch of tapes*/
DEFINE PATH name_SERVER1 owner-LT03 SRCTYPE=SERVER DESTTYPE=LIBRARY
DEVICE=lb0.0.0.2 ONLINE=YES
DEFINE PATH name_SERVER1 TAPE0 SRCTYPE=SERVER DESTTYPE=DRIVE
LIBRARY=owner-LT03 DEVICE=mt0.1.0.2 ONLINE=YES DEFINE PATH name_SERVER1 TAPE1
SRCTYPE=SERVER DESTTYPE=DRIVE
LIBRARY=owner-LT03 DEVICE=mt0.2.0.2 ONLINE=YES SERVERBACKUPNODEID 129
The logical device names did change, and I modified them accordingly in my new
devconf.out, but it didn't help. I need to get this library visible in some
way so that this database can be restored. I've been all over the internet,
but my Windows skills are limited, so I might be missing something.
TIA
**********************************************************************************************
Bank DnB NORD Polska Spolka Akcyjna z siedziba w Warszawie, ul. Postepu 15C,
02-676 Warszawa,
zarejestrowana w Sadzie Rejonowym dla m.st. Warszawy, XIII Wydzial Gospodarczy
KRS pod nr KRS
0000022156, NIP: 525-22-12-939, REGON: 017296065, Kapital zakladowy 625.200.000
zl (wplacony w
calosci)
|
