ADSM-L

Re: [ADSM-L] TS3310 rapid config for TSM

2010-04-28 17:34:12
Subject: Re: [ADSM-L] TS3310 rapid config for TSM
From: Bill Boyer <bjdboyer AT VERIZON DOT NET>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Wed, 28 Apr 2010 17:32:15 -0400
Don't need the ATLDD, Just the Atape drivers.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Steven Harris
Sent: Wednesday, April 28, 2010 4:27 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: TS3310 rapid config for TSM

Yes,  Mehdi

It is that easy.

You might like to configure an additional control path on the library in
case there is a problem with the drive with the control path that you
normally use.

Bring the library microcode up to date using the gui. Also install the
ITDT tool, and use it to bring the drive microcode up to date if necessary.

Regards

Steve

Steven Harris
TSM Admin
Paraparaumu, New Zealand

Mehdi Salehi wrote:
> Hi all,
> As FC connection is shared by both data path and control path in TS3310
> (comparing with 3494 that needs IP for library manager), I would like to
> know whether any initial configuration required for 3310 to work with TSM?
I
> mean is it possible just to add the library to TSM server zone, install
the
> needed drivers (Atape and atldd) and have it work by TSM commands?
> This might sound silly, but I need this information to estimate the
> complexity of using this library in TSM 5.4 on AIX.
>
> P.S: Please ignore logical libraries, multiple control path and other
> optional configurations.
>
> Thanks.
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.814 / Virus Database: 271.1.1/2839 - Release Date: 04/28/10
06:27:00
>
>

<Prev in Thread] Current Thread [Next in Thread>