Geoff,

There are 2 drives defined.....DRIVE01 and DRIVE02.....

DRIVE02 is connected via SCSI cable to the SCSI controller at the TSM Server. 
DRIVE01 is connected to DRIVE02 (cascade) and has a SCSI termination on it.


Mario






________________________________
From: "Gill, Geoffrey L." <GEOFFREY.L.GILL AT SAIC DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Sent: Fri, February 26, 2010 1:41:35 PM
Subject: Re: ANR8302E I/O error

How are these drives connected? Have you done any port/cable swapping to see if 
the problem moves?

Geoff Gill 
TSM/PeopleSoft Administrator 
SAIC M/S-B1P 
4224 Campus Pt. Ct.
San Diego, CA  92121
(858)826-4062 (office)
(858)412-9883 (blackberry)

> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf 
> Of
> Mario Behring
> Sent: Friday, February 26, 2010 8:33 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: ANR8302E I/O error
> 
> Hi list,
> 
> I am getting the following error on one of my drives when performing a
> MOVE DATA:
> 
>  ANR8302E I/O error on drive DRIVE01 (MT4.0.0.3) with
>   volume  (OP=OFFL, Error Number=1, CC=0, rc = 1, KEY=05,
>   ASC=53, ASCQ=02, SENSE=70.00.05.00.00.00.00.58.00.00.00.-
>   00.53.02.30.00.2C.19.00.00.00.01.32.30.30.30.32.36.4C.00-
>   .00.00.00.00.04.00.00.00.00.04.81.1B.60.00.00.00.00.00.0-
>   5.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.-
>   00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00-
>   .30.38.39.4C.31.31.33.39.37, Description=An undetermined
>   error has occurred).  Refer to Appendix C in the
>   'Messages' manual for recommended action. (SESSION: 1,
>   PROCESS: 2)
> 
> 
> This is an IBM 3573-TL library with 2 IBM ULT3580-TD4 drives. The error
> occurs only on one drive....problem is I´ve changed the drives
> already........TSM is 5.5.4.0 running on a Windows box.
> 
> Any help is appreciated.
> 
> Mario
> 
> 
>