ADSM-L

Re: [ADSM-L] ANR9999D error mounting tape

2010-02-25 07:27:23
Subject: Re: [ADSM-L] ANR9999D error mounting tape
From: Mario Behring <mariobehring AT YAHOO DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Thu, 25 Feb 2010 04:26:10 -0800
Karel,

The drive name is LTO1....not the type.....check the output of the query drive 
command below please:

                                Library Name: LTOLIB1
                                  Drive Name: LTO1
                                 Device Type: LTO
                                     On-Line: Yes
                                Read Formats: 
ULTRIUM3C,ULTRIUM3,ULTRIUM2C,ULTRIUM2,ULTRIUMC,ULTRIUM
                               Write Formats: 
ULTRIUM3C,ULTRIUM3,ULTRIUM2C,ULTRIUM2
                                     Element: 256
                                 Drive State: EMPTY
                                 Volume Name:
                                Allocated to:
                                         WWN:
                               Serial Number: 1210382024
              Last Update by (administrator): ADMIN
                       Last Update Date/Time: 11/29/2009 13:44:31
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE


Any ideas?

Mario




________________________________
From: "Bos, Karel" <Karel.Bos AT ATOSORIGIN DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Sent: Thu, February 25, 2010 8:31:41 AM
Subject: Re: ANR9999D error mounting tape

Hi,

ANR8468I LTO volume PV0001L3 dismounted from drive LTO1 

Loading an LTO3 tape in a LTO1 drive won't work. Otherway around is in 
read-only activities supported.


Kind Regards/Met vriendelijke groet,

Karel


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Mario Behring
Sent: donderdag 25 februari 2010 12:11
To: ADSM-L AT VM.MARIST DOT EDU
Subject: ANR9999D error mounting tape

Hi list,


I am getting the following error on a TSM Server 5.5.3.0 running on a Windows 
box when trying to use the Library.....the error message below happened during 
a BACKUP DB execution....while attempting to mount the tape specified in the 
VOL parameter:

02/24/2010 16:07:38      ANR8468I LTO volume PV0001L3 dismounted from drive LTO1
                          (mt4.0.0.4) in library LTOLIB1. (SESSION: 93, PROCESS:
                          50)
02/24/2010 16:07:38      ANR9999D_0521343731 (pvrntp.c:1271) Thread<34>: Could 
not
                          determine media type, rc = 1 (SESSION: 93, PROCESS: 
50)
02/24/2010 16:07:38      ANR9999D Thread<34> issued message 9999 from: (SESSION:
                          93, PROCESS: 50)
02/24/2010 16:07:38      ANR9999D Thread<34>  10660EC2 Unknown  (SESSION: 93,
                          PROCESS: 50)
02/24/2010 16:07:38      ANR9999D Thread<34>  054EE9C0 Unknown  (SESSION: 93,
                          PROCESS: 50)
02/24/2010 16:07:38      ANR9999D Thread<34>  FF9DD746 Unknown  (SESSION: 93,
                          PROCESS: 50)
02/24/2010 16:07:38      ANR9999D Thread<34>  840FC085 Unknown  (SESSION: 93,
                          PROCESS: 50)
....

There is more of this message, since I´ve issued the SET CONTEXTMESSAGING to 
ON.....the library is a LTO ULTRIUM3C...

Any help is appreciated.

Mario