ADSM-L

[ADSM-L] SV: AIX question

2009-07-09 15:43:03
Subject: [ADSM-L] SV: AIX question
From: Christian Svensson <Christian.Svensson AT CRISTIE DOT SE>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Thu, 9 Jul 2009 21:40:36 +0200
Hi,
Thanks for your all help.
I only have VPN access to the server only. I hope to get access to everything 
tomorrow so look around.

But I do get following error in errpt. When I google on that it tell me to 
double check the FC cable. Will do that when I got a chance.

LABEL:          FCA_ERR2
IDENTIFIER:     D666A8C7

Date/Time:       Thu Jul  9 21:34:16 Sweden 2009
Sequence Number: 137
Machine Id:      00013152D700
Node Id:         p141
Class:           H
Type:            TEMP
WPAR:            Global
Resource Name:   fcs0
Resource Class:  adapter
Resource Type:   df1000fa
Location:        U787F.001.DPM0DM7-P1-C5-T1
VPD:             
        Part Number.................80P4543
        EC Level....................A
        Serial Number...............1B51703BCD
        Manufacturer................001B
        Customer Card ID Number.....280B
        FRU Number..................     80P4544
        Device Specific.(ZM)........3
        Network Address.............10000000C9466D94
        ROS Level and ID............02881914
        Device Specific.(Z0)........1001206D
        Device Specific.(Z1)........00000000
        Device Specific.(Z2)........00000000
        Device Specific.(Z3)........03000909
        Device Specific.(Z4)........FF801315
        Device Specific.(Z5)........02881914
        Device Specific.(Z6)........06831914
        Device Specific.(Z7)........07831914
        Device Specific.(Z8)........20000000C9466D94
        Device Specific.(Z9)........TS1.90A4 
        Device Specific.(ZA)........T1D1.90A4 
        Device Specific.(ZB)........T2D1.90A4 
        Device Specific.(ZC)........00000000

Description
ADAPTER ERROR

        Recommended Actions
        PERFORM PROBLEM DETERMINATION PROCEDURES

Thanks everyone for your help.

Best Regards
Christian Svensson

Cell: +46-70-325 1577
E-mail: Christian.Svensson AT cristie DOT se
Skype: cristie.christian.svensson
________________________________________
Från: ADSM: Dist Stor Manager [ADSM-L AT VM.MARIST DOT EDU] f&#246;r Richard 
van Denzel [RDenzel AT TDMI DOT NL]
Skickat: den 9 juli 2009 11:33
Till: ADSM-L AT VM.MARIST DOT EDU
Ämne: Re: AIX question

Hi Christian,

On AIX you can indeed use lsdev -Cctape to see your tape devices.
My best guess to what you describe is that the path from the drive to
the host is failing. So have a look a the library and all SAN components
to see if you can see the drive there.

Also is your TSM server a standalone machine (e.g. Full SMP or separate
box) or is it an LPAR. If it's an LPAR does it use a VIO Server?
What version of AIX and (Atape) drivers are on the TSM Server?

Met vriendelijke groet, with kind regards,
Richard van Denzel

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Christian Svensson
Sent: 09 July 2009 10:04
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] AIX question

Hi Everyone,
This is more a AIX question then a TSM question.
But I wonder if their is any command such
cat /proc/scsi/scsi in AIX
or cat /var/log/messages |grep -i LTO

The reason why I'm asking is beause one of my tape drives it totally
gone from the AIX environment.
I run cfgmgr -v to auto-detect it and then when I run lsdev -Cc tape I
did see all drives but one of the RMT was in Defind mode or something
similar.
So I try to remove the RMTx Device node and run cfgmgr -v again but now
can't I find it anymore.

I have try to remove all my Device Nodes for Tape and Library and
reintall the drivers but still. I don't see my drive anymore.
If I run "q san" I don't see it in TSM either.

Any suggestions what's going on?
I'm going to see if I can get access to the SAN Switch and the library
(TS3500) via IP. But so far I don't have any access so everything that
can help me in AIX to be 100% sure it is a Switch or Library problem
should help.

I look in errpt also and I see a Adapter Problem but I can't see what it
is. Any good switches to get a better explanation of a error in errpt?



Best Regards
Christian Svensson

Cell: +46-70-325 1577
E-mail: Christian.Svensson AT cristie DOT se
Skype: cristie.christian.svensson

<Prev in Thread] Current Thread [Next in Thread>