Mario,

As a side note with the installation of the latest TSM 6.1 Admin Center, after 
installing the ISC make sure to REBOOT the server prior to installing the Admin 
Center. You will run into issues if you don't perform the reboot.

Good luck.

BERTAUT TCHUISE
Storage Support Administrator
Legg Mason Technology Services
*410-580-7032
BTchuise AT leggmason DOT com


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Bill Boyer
Sent: Thursday, June 18, 2009 9:25 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] [adsm] Admin Center installation error

Or just move right on up to the TSM 6.1 Admin Center. It supports TSM 5.5 and I 
believe TSM 5.4 servers. It's a lot snappier than previous versions, I think 
better organized and more wizard-based. Plus it's a single package and install 
for everything. I do believe it's a rather large download though.

ftp://ftp.software.ibm.com/storage/tivoli-storage-management/maintenance/adm
incenter/v6r1/6.1.0.0/

and pick your flavor of OS. Here's a link to the TSM 6.1 Information Center 
http://publib.boulder.ibm.com/infocenter/tsminfo/v6/index.jsp
Look under Installing and then Installing the server on ... section for the AC 
installation instructions.


Bill Boyer
"Hang in there, retirement is only thirty years away!" - ??


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Lloyd Dieter
Sent: Wednesday, June 17, 2009 9:33 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [adsm] Admin Center installation error

Is the install path "c:\program files\IBM\ISC601", or "c:\program 
files\IBM\ISC6011"?

If you're sure it's correct, and it still won't install, I'd suggest a manual 
de-install of the ISC, followed by a reboot and reinstall of the ISC & AC.

-Lloyd



On Tue, 16 Jun 2009 16:33:43 -0700
Mario Behring <mariobehring AT YAHOO DOT COM> wrote:

> Hi list,
>
> I have TSM Server 5.5 running on a Windows 2003 Server box. I´ve
> instaleld
ISC6011 with no errors. However, when installing the TSM Admin Center I´ve got 
an error saying that the ISC601 installation path could not be found 
(C:\Program Files\IBM\ISC601).
>
> The path exists and ISC is there...what could be happening?
>
> Below is part of the ac_install.log file, generated during the Admin
Center installation:
>
> [June 16, 2009 8:27:48 PM BRT] Starting ISC...
> [June 16, 2009 8:27:48 PM BRT] The system cannot find the path specified.
> [June 16, 2009 8:27:48 PM BRT] 1
> [June 16, 2009 8:27:48 PM BRT] Command Exit value is 0 [June 16, 2009
> 8:27:48 PM BRT] Completed step number: 7 [June 16, 2009 8:27:48 PM
> BRT] Completed step number: 8 [June 16, 2009 8:27:48 PM BRT]
> Attempting to determine if the product is
already installed.
> [June 16, 2009 8:27:48 PM BRT] The system cannot find the path specified.
> [June 16, 2009 8:27:48 PM BRT] Command Exit value is 1 [June 16, 2009
> 8:27:48 PM BRT] System RC = 1 [June 16, 2009 8:27:48 PM BRT]
> Attempting to determine if the product is
already installed.
> [June 16, 2009 8:27:48 PM BRT] The system cannot find the path specified.
> [June 16, 2009 8:27:48 PM BRT] Command Exit value is 1 [June 16, 2009
> 8:27:48 PM BRT] System RC = 1 [June 16, 2009 8:27:48 PM BRT]
> Attempting to determine if the product is
already installed.
> [June 16, 2009 8:27:48 PM BRT] The system cannot find the path specified.
> [June 16, 2009 8:27:48 PM BRT] Command Exit value is 1 [June 16, 2009
> 8:27:48 PM BRT] System RC = 1 [June 16, 2009 8:27:48 PM BRT]
> Attempting to determine if the product is
already installed.
> [June 16, 2009 8:27:48 PM BRT] The system cannot find the path specified.
> [June 16, 2009 8:27:48 PM BRT] Command Exit value is 1 [June 16, 2009
> 8:27:48 PM BRT] System RC = 1 [June 16, 2009 8:27:48 PM BRT]
> Attempting to determine if the product is
already installed.
> [June 16, 2009 8:27:48 PM BRT] The system cannot find the path specified.
> [June 16, 2009 8:27:48 PM BRT] Command Exit value is 1 [June 16, 2009
> 8:27:48 PM BRT] System RC = 1 [June 16, 2009 8:27:48 PM BRT] ERROR:
> Unable to determine the installation
state of AdminCenter!
> [June 16, 2009 8:27:48 PM BRT] Completed step number: 9 [June 16, 2009
> 8:27:48 PM BRT] RC = 1 [June 16, 2009 8:27:48 PM BRT] ERROR: Failed to
> (re)deploy our component.
> [June 16, 2009 8:27:48 PM BRT] **** Installation failed **** [June 16,
> 2009 8:27:48 PM BRT] Total install time: 0 minutes and 8
seconds.
>
>
> Thanks
>
> Mario
>
>
>
>

IMPORTANT:  E-mail sent through the Internet is not secure. Legg Mason 
therefore recommends that you do not send any confidential or sensitive 
information to us via electronic mail, including social security numbers, 
account numbers, or personal identification numbers. Delivery, and or timely 
delivery of Internet mail is not guaranteed. Legg Mason therefore recommends 
that you do not send time sensitive 
or action-oriented messages to us via electronic mail.

This message is intended for the addressee only and may contain privileged or 
confidential information. Unless you are the intended recipient, you may not 
use, copy or disclose to anyone any information contained in this message. If 
you have received this message in error, please notify the author by replying 
to this message and then kindly delete the message. Thank you.