Hello,

The o/p of command is as below:


# /usr/sbin/lsdev  -C  -c tape  -H
name  status    location     description

rmt0  Available 1Z-08-00-0,0 Differential SCSI 4mm Tape Drive
rmt1  Available 31-08-01     IBM 3580 Ultrium Tape Drive (FCP)
smc0  Available 31-08-01     IBM 3584 Library Medium Changer (FCP)
rmt2  Available 31-08-01     IBM 3580 Ultrium Tape Drive (FCP)
rmt3  Available 2U-08-01     IBM 3580 Ultrium Tape Drive (FCP)
rmt6  Available 2d-08-01     IBM 3580 Ultrium Tape Drive (FCP)
rmt4  Available 2U-08-01     IBM 3580 Ultrium Tape Drive (FCP)
rmt5  Available 2U-08-01     IBM 3580 Ultrium Tape Drive (FCP)
rmt7  Available 2d-08-01     IBM 3580 Ultrium Tape Drive (FCP)
smc1  Available 2d-08-01     IBM 3584 Library Medium Changer (FCP)
rmt8  Available 2d-08-01     IBM 3580 Ultrium Tape Drive (FCP)
rmt9  Available 2d-08-01     IBM 3580 Ultrium Tape Drive (FCP)
rmt10 Available 2d-08-01     IBM 3580 Ultrium Tape Drive (FCP)





while o/p of "q proc" does not show anything.



Regards

Ashish



On 2/11/09, Kamran Rao <kamran.rao AT grhosp.on DOT ca> wrote:
>
> As root - run "lsdev -Cc tape" and see if your drives and medium changer
> are showing up as "available" - if shows up as "defined" then you might
> have a device problem. You have not mentioned what kind of library and
> also if it is a direct connect as "scsi" or via FC adapter etc etc?
>
>
> Regards,
>
> Kamran Rao
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf 
> Of
> ashish sharma
> Sent: February 11, 2009 10:08 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: [ADSM-L] cannot run command
>
> Hello all,
>
> My TSM server version is
>
> Storage Management Server for AIX-RS/6000 - Version 5, Release 3, Level
> 5.0 on AIX.
>
> The issue i am facing is that when i try to give command  like "q path"
> or "q mount" the command hangs as shown below
>
> *************************
> tsm: TSMLM>q mount
>
> *************************
>
> and does not give any o/p but when i give command like q session, it
> works but again i am unable to cancel any session.Does anybody has any
> idea why is it happening?I think restaring the server might solve the
> problem but at present i am not in favour of it.
>
>
>
>
> --
> Best Regards
> Ashish Sharma
> ST Microelectronics Ltd.
> 919717003853
>



--
Best Regards
Ashish Sharma
ST Microelectronics Ltd.
919717003853