Re: [ADSM-L] Old copypool data question
2008-11-20 06:55:52
Thanks Rainer
But I'm wondering if I'm still in a position to do that.
Here's what we did. Rename our original tapepool and copypool to tapepool_3590
and copypool_3590.
Then created new tapepool and copypool with device class of 3592.
I then went through the long process of moving data from the tapepool_3590
volumes to tapepool volumes (now using 3592 media), one tape at a time. This
has all been done.
So now I have all the old on-site primary pool 3590 data on 3592 media, and all
offsite data being written to 3592 as well.
Will this have taken into account the old 3590 offsite copypool_3590 media?
>From a DRM point of view those tapes are still required in the event of a
>disaster.
Thanks again
Farren
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Rainer Wolf
Sent: 20 November 2008 11:42
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Old copypool data question
y.com>
In-Reply-To: <40F507919CB02E4AA5A48A4F2517A5E810276D2C9B AT CHI-MB.wiley DOT
com>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
X-Virus-Scanned: by amavisd-new
X-Barracuda-Connect: mail.uni-ulm.de[134.60.1.11]
X-Barracuda-Start-Time: 1227181339
X-Barracuda-Encrypted: AES256-SHA
X-Barracuda-Bayes: INNOCENT GLOBAL 0.0000 1.0000 -2.0210
X-Barracuda-Virus-Scanned: by Email Relay at marist.edu
X-Barracuda-Spam-Score: -2.02
X-Barracuda-Spam-Status: No, SCORE=-2.02 using global scores of TAG_LEVEL=3.5
QUARANTINE_LEVEL=1000.0 KILL_LEVEL=5.0 tests=
X-Barracuda-Spam-Report: Code version 3.2, rules version 3.2.1.10699
Rule breakdown below
pts rule name description
---- ----------------------
--------------------------------------------------
Hi,
first step:
backup stg primary-pool new-copy-pool
If any data in this first step may not be readable from the primary-stg
you still can restore that data from the old copy-pool,
so be sure that the first step has finished without failures
and then second step:
delete the old copy-storagepool-volumes with craeting and executing a macro
del.mac
consisting of lines like
'del vol xxx discardd=yes wait=yes'
... for every volume in that old copy-pool
you easily start that macro from a dsmadmc-shell using the '-itemcommit'
option
as 'macro del.mac'
regards
Rainer
Minns, Farren - Chichester schrieb:
> Hi All
>
> A few months ago I renamed our old copypool and created a new one with a new
> device class to make use of our 3592 tape drives.
>
> So I now have lots of 3590 copypool volumes with data on them, and I want to
> move them to the new 3592 media.
>
> What is the best way to do this?
>
> Many thanks in advance
>
> Farren Minns
> John Wiley & Sons Ltd
> ------------------------------------------------------------------------------------------------------------
> This email (and any attachment) is confidential, may be legally privileged
> and is intended solely for the
> use of the individual or entity to whom it is addressed. If you are not the
> intended recipient please do
> not disclose, copy or take any action in reliance on it. If you have received
> this message in error please
> tell us by reply and delete all copies on your system.
>
> Although this email has been scanned for viruses you should rely on your own
> virus check as the sender
> accepts no liability for any damage arising out of any bug or virus
> infection. Please note that email
> traffic data may be monitored and that emails may be viewed for security
> reasons.
>
> John Wiley & Sons Limited is a private limited company registered in England
> with registered number 641132.
>
> Registered office address: The Atrium, Southern Gate, Chichester, West
> Sussex, PO19 8SQ.
> ------------------------------------------------------------------------------------------------------------
--
------------------------------------------------------------------------
Rainer Wolf eMail: rainer.wolf AT uni-ulm DOT de
kiz - Abt. Infrastruktur Tel/Fax: ++49 731 50-22482/22471
Universitaet Ulm wwweb: http://kiz.uni-ulm.de
------------------------------------------------------------------------------------------------------------
This email (and any attachment) is confidential, may be legally privileged and
is intended solely for the
use of the individual or entity to whom it is addressed. If you are not the
intended recipient please do
not disclose, copy or take any action in reliance on it. If you have received
this message in error please
tell us by reply and delete all copies on your system.
Although this email has been scanned for viruses you should rely on your own
virus check as the sender
accepts no liability for any damage arising out of any bug or virus infection.
Please note that email
traffic data may be monitored and that emails may be viewed for security
reasons.
John Wiley & Sons Limited is a private limited company registered in England
with registered number 641132.
Registered office address: The Atrium, Southern Gate, Chichester, West Sussex,
PO19 8SQ.
------------------------------------------------------------------------------------------------------------
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [ADSM-L] Old copypool data question, Minns, Farren - Chichester
- Re: [ADSM-L] Old copypool data question, Rainer Wolf
- Re: [ADSM-L] Old copypool data question,
Minns, Farren - Chichester <=
- Re: [ADSM-L] Old copypool data question, Mark Stapleton
- Re: [ADSM-L] Old copypool data question, Minns, Farren - Chichester
- Re: [ADSM-L] Old copypool data question, Rainer Wolf
- Re: [ADSM-L] Old copypool data question, Phillip Burgess
- Re: [ADSM-L] Old copypool data question, Minns, Farren - Chichester
- [ADSM-L] Collocation question, Minns, Farren - Chichester
- Re: [ADSM-L] Collocation question, Richard Sims
- [ADSM-L] Question about group collocation, Minns, Farren - Chichester
|
|
|