Hello,
What I did was create a new pool, in this case for the new type of tapes,
and do a backup stg tapepool newcopypool maxpro=something to migrate to
the new tapes while your old copypooltapes are still there, when the
migration is done you can remove the old copypool.
Rolf.
> Hi people
>
> I have a copypool with about 400 tapes in it from when we were using IBM
> 3590 media. Now we are using IBM3592 media and I'm unsure of the best way
> to get the old data off the 3590 and onto 3592?
>
> Is my only real option to mark each old 3590 volume as destroyed so that
> it gets rebuilt? I was hoping I could set the reclaimstgpool flag on the
> storage pool so that I could run reclamation on that pool and have data
> moved to the new media that way, but I don't think I can use the
> reclaimstgpool flag on an offsite pool?
>
> Any tips on the best way to proceed with this would be very helpful.
>
> Many thanks
>
> Farren Minns
>
>
>
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of
> Christian Svensson
> Sent: 23 September 2008 12:59
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: [ADSM-L] SV: Slow TSM Client after Symantec installation
>
> Hi,
> Symantec did have the same issue in one of the older client also. We
> reported back to Symantec and did get a fix later on for that.
>
> Best Regards
> Christian Svensson
>
> WW Support: +44-1453-84 7009
> U.S. Support: +1-866-832-2267
> Cell: +46-70-325 1577
> E-mail: Christian.Svensson AT cristie DOT se
> Skype: cristie.christian.svensson
> ________________________________________
> Från: ADSM: Dist Stor Manager [ADSM-L AT VM.MARIST DOT EDU] för Minns,
> Farren - Chichester [fminns AT WILEY DOT COM]
> Skickat: den 23 september 2008 12:00
> Till: ADSM-L AT VM.MARIST DOT EDU
> Ämne: Slow TSM Client after Symantec installation
>
> Hi All
>
>
>
> Last weekend, an administrator installed Symantec Endpoint Protection on a
> few of our large Windows clients (details below).
>
>
>
> Since then, the backups have slowed to a crawl, and we have proves that if
> we stop the antivirus scanning specific large directories the performance
> is restored. But of course they want to have this software running on all
> drives/folders.
>
>
>
> Has anyone else dealt with this issue?
>
>
>
> Thanks in advance
>
> Farren Minns - John Wiley & Sons Ltd
>
>
>
>
>
>
>
> CLIENT
>
> OS - Windows Server 2003 R2 SP1
>
> AV - Symantec Endpoint Protection 11.0.2010.25
>
> TSM Client - 5.3.5.0
>
>
>
> TSM SERVER
>
> OS - Solaris 9
>
> Server lvl - 5.4.1.2
>
>
>
>
>
>
>
>
>
>
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of
> Phillip Burgess
> Sent: 02 July 2008 13:21
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] TSM Cluster Scheduler Question
>
>
>
> Hi Farren
>
>
>
> Yes that's correct
>
>
>
>
>
>
>
> ________________________________
>
>
>
> From: Minns, Farren - Chichester [mailto:fminns AT WILEY DOT COM]
>
> Sent: Wed 02/07/2008 12:29
>
> To: ADSM-L AT VM.MARIST DOT EDU
>
> Subject: Re: [ADSM-L] TSM Cluster Scheduler Question
>
>
>
>
>
>
>
> Thanks Phil, I have now located Cluster Manager :-)
>
>
>
> One more question, I assume the state of the scheduler on either of the
> actual cluster nodes should be set to manual?
>
>
>
> Thanks
>
>
>
> Farren
>
>
>
>
>
>
>
>
>
> -----Original Message-----
>
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of
> Phillip Burgess
>
> Sent: 02 July 2008 11:55
>
> To: ADSM-L AT VM.MARIST DOT EDU
>
> Subject: Re: [ADSM-L] TSM Cluster Scheduler Question
>
>
>
>
>
> Hi Farren
>
>
>
> Both of servers in the cluster will have a utility called Cluster
> administrator, you must use this to start and stop the TSM scheduler
> services for the backups on the clustered drives, if you stop them via
> computer manager (services.msc) then you could cause the cluster to fail
> to the other node.
>
> The cluster administrator utility should automatically start the services
> on the other node in the case of a failover.
>
> If you want to restart the TSM scheduler for the local drive backups then
> you can do this in the same manner as a non-cluster server.
>
>
>
> cheers
>
> Phil
>
>
>
> ________________________________
>
>
>
> From: Minns, Farren - Chichester [mailto:fminns AT WILEY DOT COM]
>
> Sent: Wed 02/07/2008 10:19
>
> To: ADSM-L AT VM.MARIST DOT EDU
>
> Subject: Re: [ADSM-L] TSM Cluster Scheduler Question
>
>
>
>
>
>
>
> Hi all again
>
>
>
> I am still (I think) having issues with this, although due to another
> issue which is nothing to do with me, I can't even get onto the servers in
> question to do more digging.
>
>
>
> I have a question though regarding the schedulers.
>
>
>
> In this case we have a cluster called CHI-MB with two cluster nodes
> (CHI-MB01 and CHI-MB02). Now, when stopping/starting the scheduler/s in
> question do I make sure to do this from the actual cluster (CHI-MB)? Sorry
> my terminology is off because I'm not the system administrator for this
> kit, just TSM. Will this then effect the active node? And if so, is there
> some mechanism in place that starts the scheduler on the passive node if
> there is a failover?
>
>
>
> Thanks
>
>
>
> Farren
>
>
>
>
>
>
>
>
>
>
>
> -----Original Message-----
>
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of
> PAC Brion Arnaud
>
> Sent: 01 July 2008 11:15
>
> To: ADSM-L AT VM.MARIST DOT EDU
>
> Subject: Re: [ADSM-L] TSM Cluster Scheduler Question
>
>
>
> Farren,
>
>
>
>
>
> You may be affected by a faulty configuration, where the password in MS
>
> cluster's checkpoint file is not synchronized with the local registry
>
> password anymore, thus making the service fail ... It happened several
>
> times in our shop already !
>
> IBM noticed the problem, and published a solution here :
>
> http://www-1.ibm.com/support/docview.wss?uid=swg21243061
>
>
>
> May be of interest for you !
>
>
>
> Cheers.
>
>
>
> Arnaud
>
>
>
>
>
> ************************************************************************
>
> ******
>
> Panalpina Management Ltd., Basle, Switzerland,
>
> CIT Department Viadukstrasse 42, P.O. Box 4002 Basel/CH
>
> Phone: +41 (61) 226 11 11, FAX: +41 (61) 226 17 01
>
> Direct: +41 (61) 226 19 78
>
> e-mail: arnaud.brion AT panalpina DOT com
>
> ************************************************************************
>
> ******
>
>
>
>
>
> -----Original Message-----
>
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of
>
> Henrik Vahlstedt
>
> Sent: mardi 1 juillet 2008 11:58
>
> To: ADSM-L AT VM.MARIST DOT EDU
>
> Subject: Re: TSM Cluster Scheduler Question
>
>
>
> Hi,
>
>
>
> First, de-select "affect group" in the cluster resource properties for
>
> the TSM Cluster Scheduler in cluster administrator, cluadmin.exe.
>
> This prevents the whole cluster to failover when the TSM service stops
>
> due to whatever.. ex. bad password.
>
>
>
> Verify that the correct registry parameter is replicated as a part of
>
> the cluster resource:
>
> HKEY_LOCAL_MACHINE\SOFTWARE\IBM\ADSM\CurrentVersion\Nodes\
>
> <nodename>\<TSM server instance name>
>
>
>
> Consider to set passexp=0 on the TSM server for the Exchange node.
>
>
>
> Update PW on both cluster nodes.
>
>
>
> "what does the Cluster Scheduler actually do?"
>
> Backing up Exchange? :-) You will find the answer if you search on the
>
> nodename and schedule in TSM.
>
>
>
>
>
> //Henrik
>
>
>
>
>
>
>
> -----Original Message-----
>
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of
>
> Minns, Farren - Chichester
>
> Sent: den 1 juli 2008 11:31
>
> To: ADSM-L AT VM.MARIST DOT EDU
>
> Subject: [ADSM-L] TSM Cluster Scheduler Question
>
>
>
> Hi All
>
>
>
> TSM 5.4.1.2 on Solaris 2.9
>
> Backing up Exchange (MS Windows Server 2003, RC2 SP") - 5.5.0.0 in a
>
> clustered environment.
>
>
>
> We had this set up by an outside company and are now seeing some
>
> problems with the TSM Cluster Scheduler automatically failing over the
>
> cluster due to a password issue (this is as far as I can see anyway).
>
>
>
> So, the dumb question, what does the Cluster Scheduler actually do?
>
> I can see there is a separate schedule for the Exchange TDP backups.
>
>
>
> Thanks
>
>
>
> Farren
>
>
>
>
>
>
>
>
>
> ------------------------------------------------------------------------
>
> ------------------------------------
>
> This email (and any attachment) is confidential, may be legally
>
> privileged and is intended solely for the use of the individual or
>
> entity to whom it is addressed. If you are not the intended recipient
>
> please do not disclose, copy or take any action in reliance on it. If
>
> you have received this message in error please tell us by reply and
>
> delete all copies on your system.
>
>
>
> Although this email has been scanned for viruses you should rely on your
>
> own virus check as the sender accepts no liability for any damage
>
> arising out of any bug or virus infection. Please note that email
>
> traffic data may be monitored and that emails may be viewed for security
>
> reasons.
>
>
>
> John Wiley & Sons Limited is a private limited company registered in
>
> England with registered number 641132.
>
>
>
> Registered office address: The Atrium, Southern Gate, Chichester, West
>
> Sussex, PO19 8SQ.
>
> ------------------------------------------------------------------------
>
> ------------------------------------
>
>
>
>
>
> -------------------------------------------------------------------
>
> The information contained in this message may be CONFIDENTIAL and is
>
> intended for the addressee only. Any unauthorised use, dissemination of
>
> the information or copying of this message is prohibited. If you are not
>
> the addressee, please notify the sender immediately by return e-mail and
>
> delete this message.
>
> Thank you.
>
> ------------------------------------------------------------------------------------------------------------
>
> This email (and any attachment) is confidential, may be legally privileged
> and is intended solely for the
>
> use of the individual or entity to whom it is addressed. If you are not
> the intended recipient please do
>
> not disclose, copy or take any action in reliance on it. If you have
> received this message in error please
>
> tell us by reply and delete all copies on your system.
>
>
>
> Although this email has been scanned for viruses you should rely on your
> own virus check as the sender
>
> accepts no liability for any damage arising out of any bug or virus
> infection. Please note that email
>
> traffic data may be monitored and that emails may be viewed for security
> reasons.
>
>
>
> John Wiley & Sons Limited is a private limited company registered in
> England with registered number 641132.
>
>
>
> Registered office address: The Atrium, Southern Gate, Chichester, West
> Sussex, PO19 8SQ.
>
> ------------------------------------------------------------------------------------------------------------
>
> ------------------------------------------------------------------------------------------------------------
>
> This email (and any attachment) is confidential, may be legally privileged
> and is intended solely for the
>
> use of the individual or entity to whom it is addressed. If you are not
> the intended recipient please do
>
> not disclose, copy or take any action in reliance on it. If you have
> received this message in error please
>
> tell us by reply and delete all copies on your system.
>
>
>
> Although this email has been scanned for viruses you should rely on your
> own virus check as the sender
>
> accepts no liability for any damage arising out of any bug or virus
> infection. Please note that email
>
> traffic data may be monitored and that emails may be viewed for security
> reasons.
>
>
>
> John Wiley & Sons Limited is a private limited company registered in
> England with registered number 641132.
>
>
>
> Registered office address: The Atrium, Southern Gate, Chichester, West
> Sussex, PO19 8SQ.
>
> ------------------------------------------------------------------------------------------------------------
>
> ------------------------------------------------------------------------------------------------------------
> This email (and any attachment) is confidential, may be legally privileged
> and is intended solely for the
> use of the individual or entity to whom it is addressed. If you are not
> the intended recipient please do
> not disclose, copy or take any action in reliance on it. If you have
> received this message in error please
> tell us by reply and delete all copies on your system.
>
> Although this email has been scanned for viruses you should rely on your
> own virus check as the sender
> accepts no liability for any damage arising out of any bug or virus
> infection. Please note that email
> traffic data may be monitored and that emails may be viewed for security
> reasons.
>
> John Wiley & Sons Limited is a private limited company registered in
> England with registered number 641132.
>
> Registered office address: The Atrium, Southern Gate, Chichester, West
> Sussex, PO19 8SQ.
> ------------------------------------------------------------------------------------------------------------
> ------------------------------------------------------------------------------------------------------------
> This email (and any attachment) is confidential, may be legally privileged
> and is intended solely for the
> use of the individual or entity to whom it is addressed. If you are not
> the intended recipient please do
> not disclose, copy or take any action in reliance on it. If you have
> received this message in error please
> tell us by reply and delete all copies on your system.
>
> Although this email has been scanned for viruses you should rely on your
> own virus check as the sender
> accepts no liability for any damage arising out of any bug or virus
> infection. Please note that email
> traffic data may be monitored and that emails may be viewed for security
> reasons.
>
> John Wiley & Sons Limited is a private limited company registered in
> England with registered number 641132.
>
> Registered office address: The Atrium, Southern Gate, Chichester, West
> Sussex, PO19 8SQ.
> ------------------------------------------------------------------------------------------------------------
>
>
|
