The only other suggestion I have is to query the volume history and see
what library used it last. "q volhist"
Good luck. 

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Thomas Denier
Sent: Friday, October 17, 2008 1:34 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Server looking for volume in wrong library

-----Ricardo.Ribeiro wrote: -----

>I wonder if you could have a label problem on that tape, you may want 
>to re-label it.

The tape involved in the latest occurance of the problem was loaded,
read, and unloaded without incident about 14 hours before the problem
occurred, and again about 10 hours after the problem occurred. In any
case, TSM finds out which library a tape is in by consulting the TSM
database, not by reading the tape label.

>Also, when you run the command "q libvol  TJULIB01_1120" what is the 
>status of that one tape?

The tape does not appear in the output from such a query. This is what I
would expect; the tape was never supposed to be in the TJULIB01_1120
library, and I have found no evidence that it was ever put into that
library erroneously. A similary query for the TJULIB01_3592 library
shows a status of 'Private' and last use of 'Data' for the volume.
This is exactly the result I would expect.