hmmm... Perhaps a difference in virtual drives vs. physical? Or
Windows vs AIX? We are Virtual and Windows.
Thanks for your assistance Howard. -Brett
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Howard Coles
Sent: Wednesday, July 30, 2008 12:56 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Upgrade from 5.3.3 to 5.4.3
Yes, I see the WWN.
tsm: TSMSRV>q drive f=d
Library Name: <libname>
Drive Name: <drivename>01
Device Type: LTO
On-Line: Yes
Read Formats:
ULTRIUM3C,ULTRIUM3,ULTRIUM2C,ULT-
RIUM2,ULTRIUMC,ULTRIUM
Write Formats:
ULTRIUM3C,ULTRIUM3,ULTRIUM2C,ULT-
RIUM2
Element: 257
Drive State: EMPTY
Volume Name:
Allocated to:
WWN: 5005076###0#####
Serial Number: ##########
Last Update by (administrator): ADMINID
Last Update Date/Time: 08/08/2006 08:41:42
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): ASNEEDED
That repeats for the number of drives in my 3584.
(this works in 5.2.9 as well)
See Ya'
Howard
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of Whitlock, Brett
> Sent: Wednesday, July 30, 2008 12:14 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] Upgrade from 5.3.3 to 5.4.3
>
> Hey Howard,
> The drives appear to be working but I can't see the WWN. I did the Q
> Dr f=d and it reports on the drives and the serial numbers. However,
> I don't remember this query ever showing the WWN's. In my experience
the
> command line will give you the serial number (but not WWN) and the
mgmt
> console shows the WWN (but not serial #). If you do a q dr f=d are
you
> seeing both?
> Thanks-Brett
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of Howard Coles
> Sent: Wednesday, July 30, 2008 11:11 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] Upgrade from 5.3.3 to 5.4.3
>
> Can you see them when you query from the Admin Console (command line)?
> That would determine whether you had an interface problem or a db
> problem.
>
> q drive libname drivename f=d
>
> See Ya'
> Howard
>
> > -----Original Message-----
> > From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On
Behalf
> > Of Whitlock, Brett
> > Sent: Wednesday, July 30, 2008 10:56 AM
> > To: ADSM-L AT VM.MARIST DOT EDU
> > Subject: [ADSM-L] Upgrade from 5.3.3 to 5.4.3
> >
> > Hi all, After upgrading from 5.3.3 to 5.4.3 (Windows) When I open a
> > management console and try to look at the device information, I
can't
> > see the World Wide Names of my devices anymore. Happen to anyone
> else?
> > Suggestions?
> >
> > Thanks - Brett
|