Hi to all
I have a TDP for Oracle version 5.3.3-0 on a linux machine RHEL3 u8 with Oracle
10g , I backup the database with LanFree backup with a HBA Emulex Lp9002-L .
During the backup I got the following messages: (the TSM server version is
5.5.0.3 on a AIX machine)
06/05/2008 02:05:14 ANR8302E (Session: 4481, Origin: NEWALEPHPROD_SA) I/O
error on drive I2000DRV3 (/dev/IBMtape2) with volume
000014L2 (OP=WRITE, Error Number=5, CC=0, KEY=06,
ASC=29,
ASCQ=00,
SENSE=70.00.06.00.00.00.00.1C.00.00.00.00.29.00-
.30.00.10.22.00.01.00.00.20.20.20.20.20.20.20.00.00.00.0-
0.00.26.01, Description=An undetermined error has
occurred). Refer to Appendix D in the 'Messages'
manual
But the backup continue with the same drive and tape and finish correctly, I
got the statistics of:
NEWALEPHPROD_ORA 6001.250 2008-06-05 02:03:14 00:48:30
The DBA of this server check the log message on the oracle side and looks O.K
The volume in the TSM side dismount correctly: 06/05/2008 03:01:43
ANR8325I Dismounting volume 000014L2 - 10 minute mount retention expired.
But in the log around 1 / 2 minutes after I got this message:
06/05/2008 03:02:59 ANR8213W Session open with 132.74.59.101 timed out.
06/05/2008 03:02:59 ANR0454E Session rejected by server NEWALEPHPROD_SA,
reason: Communication Failure.
06/05/2008 03:02:59 ANR8390W Failure connecting to library client
NEWALEPHPROD_SA to manage volume 000014L2.
06/05/2008 03:03:01 ANR8779E Unable to open drive /dev/rmt2, error
number=16.
The drive /dev/rmt2 in the TSM side is O.K I can work with it !!!! Did I need
to make some adjusting as maybe the retention time in the devclass or on the
linux side in some configuration files ???
Any advice what to do !!!!!
T.I.A Regards
Ouzen Robert
Haifa University
Israel
|
