Hi list,

I have two libraries connected to a TSM 5.2.2 Server running on a Red Hat.

Library LIBLTO1 is a 3583L18 with 3 LTO2 drives and LIBLTO2 is an ULT3582 with 
2 LTO2 drives.

The Linux Admin manual says that I should not use FORMAT=DRIVE on both 
libraries when issuing the DEFINE DEVCLASS command, because the results can be 
unpredictable.

How do I determine which is the correct drive format (ultriumc for instance)?

I had only one library with three drives....now that there is another one with 
2...TSM is not working properly...I keep getting the following errors at the 
ACT log:


04/29/2008 07:00:15   ANR8441E Initialization failed for SCSI library LIBLTO1.
 PM                    (PROCESS: 14)
04/29/2008 07:00:15   ANR8460E AUDIT LIBRARY process for library LIBLTO1 failed.
 PM                    (PROCESS: 14)
04/29/2008 07:00:15   ANR0985I Process 14 for AUDIT LIBRARY running in the
 PM                    BACKGROUND completed with completion state FAILURE at
                       07:00:15 PM. (PROCESS: 14)



Any help is appreciated.

Mario







      
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile.  Try it now.  
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ