This has the feeling of a hardware problem OR
scsi interface/drivers/firmware which are not compatible.
Is that combination of hardware/firmware/driver code supported
/up_to_date
I would check on the latest firmware for the library.
James Drozynski
IBM Pittsburgh Lab
11 Stanwix Street
Pittsburgh Pa. 15222
Tel:412-667-4421
Fax:412-667-6975
Tie:989-4421
"Llano, Martin" <martin.llano AT EDS DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
02/04/2008 01:36 PM
Please respond to
"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To
ADSM-L AT VM.MARIST DOT EDU
cc
Subject
[ADSM-L] Error when define library path IBM 3576
I have some problems when I want to define library path with a libraty IBM
3576, with Windows 2003 Server and TSM Server 5.3.5.2.
Tsm log error:
ANR8300E I/O error on library IBM_3576 (OP=8401C08C, CC=210, KEY=FF,
ASC=FF, ASCQ=FF, SENSE=**NONE**, Description=The device was reset due to
device power-up, SCSI bus reset, or manual tape load/eject). Refer to
Appendix D in the 'Messages' manual for recommended
action. (SESSION: 436)
I didn't find any suggestion in Web
Somebody can help me ??
Regards
Martin A. Llano | EDS South HUB
| BUR & Storage Services
| Office: +54.11.5550.2604
| Buenos Aires, Argentina
|