NB: This email and its contents are subject to our email legal notice
which can be viewed at http://www.sars.gov.za/Email_Disclaimer.pdf
----
Good day
I am battling to get the adic fastor 2 tape library working on TSM, my
configuration is as follows
Tsm server version 5.3.4 on windows 2003 standard edition
Adic fastor 2 Libray firmware S44R and drive firmware 1702
My path definitions are as follows
Define path bks01 adicfs2 srct=server destt=drive device=lb0.0.0.5
online=yes
Define path bks01 drive0 srct=server destt=drive library=adicfs2
device=mt6.0.0.5 online=yes
Every time I try to label the tapes or run the migration, I get the
error below
ANR8302E I/O error on drive DRIVE0 (mt6.0.0.5) with volume (OP=SETMODE,
Error
Number=87, CC=207, KEY=05, ASC=26, ASCQ=00,
SENSE=70.00.05.00.00.00.00.1E.00.00.00.00.26.00.00.8D.00.0C.00.00.00.00.
,
Description=Device is not in a state capable of performing request).
Refer to
Appendix D in the 'Messages' manual for recommended action.
ANR8357I Error reading label of volume from slot-element 2 in drive
DRIVE0
(mt6.0.0.5) of library ADICFS2.
Is there anything that I missed? Any help much appreciated.
|