ADSM-L

Re: [ADSM-L] RES: [ADSM-L] RES: [ADSM-L] Volumes off library

2007-10-09 11:12:48
Subject: Re: [ADSM-L] RES: [ADSM-L] RES: [ADSM-L] Volumes off library
From: Juan Perla <laperla AT U.WASHINGTON DOT EDU>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Tue, 9 Oct 2007 07:52:38 -0700
Hello Vinicius,

I think you will have to migrate the volumes so that the data is kept the
same.  You probably need to "move data" or "move nodedata"
That way you are moving the data from the existing library to the new
library and then you have the old library that can be still be used for
other purposes.

HTH,
Juan


On Tue, 9 Oct 2007, Vinicius Fraga wrote:

> Date: Tue, 9 Oct 2007 11:42:24 -0300
> From: Vinicius Fraga <vinicius AT VANGUARD-IT.COM DOT BR>
> Reply-To: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: [ADSM-L] RES: [ADSM-L] RES: [ADSM-L] Volumes off library
>
> Hi Juan, in this env we are a little bit different
>
> We don't want to deactivate the old library (the library it self is not
> old, it has the same config as the new lib, LTO3 FC, 44 sltos)
>
> What I want to do is like this:
>
> Today I have a pool: SP-FILESYSTEM-LTO -> LTOCLASS1 -> LTOLIB1
> In this pool I have 100 tapes off library
>
> With new library: SP-FILESYSTEM-LTO-NEW -> LTOCLASSNEW -> LTOLIBNEW
> And pass this tapes that are off to this lib, without deactivating de
> LTOLIB1
>
>
>
> Atenciosamente,
>
> Vinicius do Valle Fraga
> Engenheiro de Sistemas
> VANguard - Value Added Network guardians
> http://www.vanguard-it.com.br
> Fone: 55 11 5103-0941
>
> -----Mensagem original-----
> De: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] Em nome de
> Juan Perla
> Enviada em: Tuesday, October 09, 2007 11:40 AM
> Para: ADSM-L AT VM.MARIST DOT EDU
> Assunto: Re: [ADSM-L] RES: [ADSM-L] Volumes off library
>
> Hey,
> We just did something similar.
>
> we started with 1 old acsls library (library=lsm2 and acsid=1) 4
> tapedrives
> and 300 cartridges
>
> we ended with 1 new acsls library (libray=lsm2 acsid=2) 4 tapedrives and
> 300 cartridges.
>
> 1)created the 4 new tape drives in the lsm2 library that were physically
>   located in the new library (silo acsid=2)
>
> 2)disabled the 4 old tape drives in the old silo (acsid=1)
>
> 3)updated the old lsm2 library to have acsid=2
>
> 4)enabled the 4 new tape drives
>
> 5)then we physically ejected from the old library and entered into the
>   new library.
> all worked fine.
> Hope this helps,
> Juan Perla
>
>
>
> On Tue, 9 Oct 2007, Vinicius Fraga wrote:
>
> > Date: Tue, 9 Oct 2007 11:19:16 -0300
> > From: Vinicius Fraga <vinicius AT VANGUARD-IT.COM DOT BR>
> > Reply-To: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
> > To: ADSM-L AT VM.MARIST DOT EDU
> > Subject: [ADSM-L] RES: [ADSM-L] Volumes off library
> >
> > Ok, let me detail the env.
> >
> > This client has 4 libraries (LTOLIB1 / LTOLIB2 / LTOLIB3 / LTOLIB4)
> each
> > library has 44 slots and 2 drivers, the library LTOLIB1 and LTOLIB2
> are
> > destiny of filesystem data, and this 2 libraries are overloaded with
> > aprx 100 tapes off librarie.
> >
> > The client is putting additional 3 libraries in the env, in the same
> > config (44 sltos and 2 drivers).
> >
> > The question is how to make the older tapes into the new library? I
> will
> > have to migrate the volumes?
> >
> >
> >
> > Atenciosamente,
> >
> > Vinicius do Valle Fraga
> > Engenheiro de Sistemas
> > VANguard - Value Added Network guardians
> > http://www.vanguard-it.com.br
> > Fone: 55 11 5103-0941
> >
> > -----Mensagem original-----
> > De: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] Em nome de
> > Larry Clark
> > Enviada em: Monday, October 08, 2007 5:29 PM
> > Para: ADSM-L AT VM.MARIST DOT EDU
> > Assunto: Re: [ADSM-L] Volumes off library
> >
> > I'm trying to understand your situation....
> > The new library is the same as the old but larger...more slots?
> > -storage pools defs reference device classes
> > -device class defs reference libraries
> >
> > So, I'm thinking, you might be able to
> > - check the remaining volumes out of the current library
> > - update the device class def to point to the new library
> > - check the current ones and the new ones into the newer, larger
> > library.
> >
> > ----- Original Message -----
> > From: "Vinicius Fraga" <vinicius AT VANGUARD-IT.COM DOT BR>
> > To: <ADSM-L AT VM.MARIST DOT EDU>
> > Sent: Monday, October 08, 2007 3:23 PM
> > Subject: [ADSM-L] Volumes off library
> >
> >
> > Hi guys,
> >
> > I have a client that has too many volumes off library, about (100
> > volumes),
> > and each time it request a restore, it take about 20 volumes, and
> mostly
> > off
> > times this volumes is offsite,
> >
> > Well i know it's a sizing problem, but this is not the question here,
> >
> > The client bought 3 knew library (aprx. 120 slots) now he want to put
> > this
> > volumes (100 volumes) inside the library, but there isn't any way to
> > change
> > the pool of a volume (like update volume xxxx stg=yyyy), so i will
> need
> > to
> > migrate all data to the new pool? i don't want to deactive the actual
> > library
> >
>